Non-cuttable material created through local resonance and strain rate effects
Open Access
- 20 July 2020
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-24
Abstract
We have created a new architected material, which is both highly deformable and ultra‐resistant to dynamic point loads. The bio-inspired metallic cellular structure (with an internal grid of large ceramic segments) is non-cuttable by an angle grinder and a power drill, and it has only 15% steel density. Our architecture derives its extreme hardness from the local resonance between the embedded ceramics in a flexible cellular matrix and the attacking tool, which produces high-frequency vibrations at the interface. The incomplete consolidation of the ceramic grains during the manufacturing also promoted fragmentation of the ceramic spheres into micron-size particulate matter, which provided an abrasive interface with increasing resistance at higher loading rates. The contrast between the ceramic segments and cellular material was also effective against a waterjet cutter because the convex geometry of the ceramic spheres widened the waterjet and reduced its velocity by two orders of magnitude. Shifting the design paradigm from static resistance to dynamic interactions between the material phases and the applied load could inspire novel, metamorphic materials with pre-programmed mechanisms across different length scales.Keywords
This publication has 24 references indexed in Scilit:
- Characterization of Steel Foams for Structural ComponentsMetals, 2012
- Steel foam for structures: A review of applications, manufacturing and material propertiesJournal of Constructional Steel Research, 2012
- Material microstructure optimization for linear elastodynamic energy wave managementJournal of the Mechanics and Physics of Solids, 2012
- Biological materials: A materials science approachJournal of the Mechanical Behavior of Biomedical Materials, 2011
- Materials Selection—The Basics2011
- Application of Fracture Mechanics Concepts to Hierarchical Biomechanics of Bone and Bone-like MaterialsInternational Journal of Fracture, 2006
- Locally Resonant Sonic MaterialsScience, 2000
- Turbulence characteristics of wall jets along strong convex surfacesInternational Journal of Mechanical Sciences, 1987
- Turbulent Wall Jets With Cylindrical Streamwise Surface CurvatureJournal of Fluids Engineering, 1976
- On the free transverse vibrations of a uniform circular disc clamped at its centre; and on the effects of rotationProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1922