Utilization of Lemon Peel Adsorbent for Efficient Nickel Removal from Synthetic Wastewater
Open Access
- 20 June 2025
- journal article
- Published by Kaunas University of Technology (KTU) in Environmental Research, Engineering and Management
- Vol. 81 (2) , 126-135
Abstract
Heavy metals in water are considered pollutants and represent a worldwide environmental issue. Common heavy metal ions with high toxicity and carcinogenicity, such as nickel, are often found in contaminated water. The increasing presence of human-made sources of nickel, introduced into water bodies through industrial discharge, agricultural runoff, and wastewater treatment plants, as well as natural sources, underscores the importance of removing nickel from water before consumption. Adsorption is a widely used method for removing nickel ions from contaminated water. Different adsorbents have been produced from waste of various materials and applied to eliminate nickel ions. In this study, natural biosorbent was prepared using lemon peel to remove nickel ions from simulated wastewater in a batch reactor mode. Various parameters influencing the adsorption process of the current study were examined. These parameters involved the application of a pH value range of 2 to 7, a contact time range of 30 to 120 minutes, and an adsorbent mass range of 0.25 g to 3 g per 100 mL, with a constant initial concentration of nickel (II). Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to analyze and evaluate the surface and the functional groups of the raw and used adsorbent. Significant changes in the surface morphology of the used adsorbent were observed, indicating high adsorption of nickel ions. The influence of the temperature on the adsorption process was also investigated. The results elucidated that increasing the temperature enhanced the nickel (II) removal percentage, suggesting that the process is endothermic. Moreover, different isotherm models and kinetic parameters, such as Langmuir and Freundlich, were used to further describe the adsorption characteristics of the biosorbent. Overall, the results indicate that lemon peel shows significant potential as a low-cost biosorbent for removing nickel (II) ions.Keywords
This publication has 29 references indexed in Scilit:
- Cadmium removal efficiency from synthetic wastewater using sawdust as a sustainable adsorbentDesalination and Water Treatment, 2024
- Green synthesis of NiO nanoparticles using a Cd hyperaccumulator (Lactuca sativa L.) and its application as a Pb(II) and Cu(II) adsorbentEnvironmental Nanotechnology, Monitoring & Management, 2023
- Oil adsorption from produced water onto Coronavirus Face Masks wasteIndian Chemical Engineer, 2023
- The Effect of Organic Matter on Heavy Metals Removal from Simulated Wastewater using a Reverse Osmosis Membrane ProcessChemistrySelect, 2022
- Batch and continuous packed bed column studies on biosorption of nickel (II) by sugarcane bagasseResults in Chemistry, 2022
- The biosorption of reactive red dye onto orange peel waste: a study on the isotherm and kinetic processes and sensitivity analysis using the artificial neural network approachEnvironmental Science and Pollution Research, 2020
- Uptake of cyanide compounds from aqueous solutions by lemon peel with utilising the residue absorbent as rodenticideIndian Chemical Engineer, 2019
- pH-dependant structural and morphology evolution of Ni(OH)2 nanostructures and their morphology retention upon thermal annealing to NiOMaterials Chemistry and Physics, 2011
- Adsorptive removal of cobalt from aqueous solution by utilizing lemon peel as biosorbentBiochemical Engineering Journal, 2010
- Removal Characteristics Of Cadmium ION By Waste Egg ShellEnvironmental Technology, 2000