Out-of-plane permeability of 3D woven fabrics for composite structures
Authors:
- 29 October 2019
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 111 (7) , 1047-1053
Abstract
Polymer composites in structural applications commonly provide reinforcement based on 2D textile products, such as woven fabrics or non-crimp fabrics. This leads to sensitivity for delamination and high lay-up effort, especially when a large part thickness is required. 3D woven fabrics (3D-WF) can prevent delamination by incorporating fibers in out-of-plane direction and given the increased areal weight of the single layers, the effort for lay-up is strongly reduced. However, large part thicknesses are also challenging when it comes to impregnation. A high out-of-plane permeability helps facing this challenge. Within this study, the saturated out-of-plane permeability of different 3D-WF (glass fiber) with an areal weight ranging from 1850 g/m2 to 5242 g/m2 was measured. It was found that at an equal fiber volume content of 50% the increase of out-of-plane oriented reinforcement fibers leads to an increasing out-of-plane permeability with increasing areal weight.Keywords
This publication has 13 references indexed in Scilit:
- Influence of preforming technology on the out-of-plane impregnation behavior of textilesComposites Part A: Applied Science and Manufacturing, 2015
- Measurement System for On-Line Compaction Monitoring of Textile Reaction to Out-of-Plane ImpregnationAdvanced Composites Letters, 2014
- Influence of textile parameters on the in-plane PermeabilityComposites Part A: Applied Science and Manufacturing, 2013
- Static and vibration compaction and microstructure analysis on plain-woven textile fabricsComposites Part A: Applied Science and Manufacturing, 2008
- In‐plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: Experimental resultsPolymer Composites, 2007
- Numerical computation of the fiber preform permeability tensor by the homogenization methodPolymer Composites, 2002
- Experimental and theoretical studies of fabric compaction behavior in resin transfer moldingMaterials Science and Engineering: A, 2001
- A permeability database for composites manufacturingPolymer Composites, 1997
- The interactions between flows occurring inside and outside fabric tows during rtmComposites Science and Technology, 1997
- Numerical and analytical study to estimate the effect of two length scales upon the permeability of a fibrous porous mediumTransport in Porous Media, 1995