Assessing Reductant Chemistry During In-Cylinder Regeneration of Diesel Lean NOx Traps
- 25 October 2004
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Lean NOx Trap (LNT) catalysts are capable of reducing NOx in lean exhaust from diesel engines. NOx is stored on the catalyst during lean operation; then, under rich exhaust conditions, the NOx is released from and reduced by the catalyst. The process of NOx release and reduction is called regeneration. One method of obtaining the rich conditions for regeneration is to inject additional fuel into the engine cylinders while throttling the engine intake air flow to effectively run the engine at rich air:fuel ratios; this method is called “in-cylinder” regeneration. In-cylinder regeneration of LNT catalysts has been demonstrated and is a candidate emission control technique for commercialization of light-duty diesel vehicles to meet future emission regulations. In the study presented here, a 1.7-liter diesel engine with a LNT catalyst system was used to evaluate in-cylinder regeneration techniques. Characterization of the exhaust reductant chemistry during in-cylinder regeneration was performed. The effects of various injection strategies and fuels and the resulting exhaust chemistry on the performance of the LNT catalyst were analyzed. In addition, exhaust species measurement of NOx and select reductants were performed inside of the catalyst cells with a capillary-based mass spectrometry technique. The effect of various injection parameters on exhaust chemistry species and LNT performance are discussed. Results indicate that fuel chemistry does affect engine-out hydrocarbon (HC) species, but not engine-out carbon monoxide (CO) or hydrogen (H2) generation. Higher engine-out CO and H2 correlate to improved NOx reduction, irrespective of HCs.Keywords
This publication has 15 references indexed in Scilit:
- Factors Affecting Diesel LNT Durability in Lab Reactor StudiesSAE International Journal of Advances and Current Practices in Mobility, 2004
- Achieving Tier 2 Bin 5 Emission Levels with a Medium Duty Diesel Pick-Up and a NOX Adsorber, Diesel Particulate Filter Emissions System - NOX Adsorber ManagementSAE International Journal of Advances and Current Practices in Mobility, 2004
- NOx Trap Regeneration with an On-Board Hydrogen Generation DeviceSAE International Journal of Advances and Current Practices in Mobility, 2004
- Development of a Diesel Passenger Car Meeting Tier 2 Emissions LevelsSAE International Journal of Advances and Current Practices in Mobility, 2004
- Development of NOx Trap System for Commercial Vehicle - Basic Characteristics and Effects of Sulfur Poisoning -SAE International Journal of Advances and Current Practices in Mobility, 2004
- Systems Approach to Meeting EPA 2010 Heavy-Duty Emission Standards Using a NOx Adsorber Catalyst and Diesel Particle Filter on a 15L EngineSAE International Journal of Advances and Current Practices in Mobility, 2004
- Regeneration of NOx trap catalystsCatalysis Today, 2003
- Effects of Regeneration Conditions on NOX Adsorber PerformanceSAE International Journal of Advances and Current Practices in Mobility, 2002
- Durability of NOx Absorbers: Effects of Repetitive Sulfur Loading and DesulfationSAE International Journal of Advances and Current Practices in Mobility, 2002
- Cummins Light Truck Diesel Engine Progress Report, 2001SAE International Journal of Advances and Current Practices in Mobility, 2001