Self‐bonding in an amorphous polymer below the glass transition: A T‐peel test investigation
Authors:
- 5 April 2004
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 42 (10) , 1861-1867
Abstract
Films of amorphous polystyrene (PS) with a weight‐average molecular weight (Mw) of 225 × 103 g/mol were bonded in a T‐peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (th) and healing temperature (Th). G was found to develop with (th)1/2 at Th = Tg‐bulk − 33 °C (where Tg‐bulk is the glass‐transition temperature of the bulk sample), and log G was found to develop with 1/Th at Tg‐bulk − 43 °C ≤ Th ≤ Tg‐bulk − 23 °C. The smallest measured value of G = 1.4 J/m2 was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<Tg‐bulk) was controlled by the diffusion of chain segments feasible above the glass‐transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below Tg‐bulk. Close values of G = 8–9 J/m2 were measured for the symmetric interfaces of polydisperse PS [Mw = 225 × 103, weight‐average molecular weight/number‐average molecular weight (Mw/Mn) = 3] and monodisperse PS (Mw = 200 × 103, Mw/Mn = 1.04) after healing at Th = Tg‐bulk − 33 °C for 24 h. This implies that the self‐bonding of high‐molecular‐weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004Keywords
Funding Information
- Danish Technical Research Council of the Danish Research Agency
This publication has 19 references indexed in Scilit:
- Elongational Viscosity of Narrow Molar Mass Distribution PolystyreneMacromolecules, 2003
- Mobility Gradient in Surface Region of Monodisperse Polystyrene FilmsMacromolecules, 2003
- Healing of interfaces of amorphous and semi-crystalline poly(ethylene terephthalate) in the vicinity of the glass transition temperaturePolymer, 2001
- Surface Mobile Layer of Polystyrene Film below Bulk Glass Transition TemperatureMacromolecules, 2001
- Surface mechanical properties of low-molecular-weight polystyrene below its glass-transition temperaturesJournal of Polymer Science Part B: Polymer Physics, 2000
- Strength Development at the Interface of Amorphous Polymers and Their Miscible Blends, below the Glass Transition TemperatureMacromolecules, 1998
- Crystallisation of PET from the Amorphous State: Observation of Different Rates for Surface and Bulk Using XPS and FTIRSurface and Interface Analysis, 1996
- Depth Dependence of the Surface Glass Transition Temperature of a Poly(styrene-block-methyl methacrylate) Diblock Copolymer Film on the Basis of Temperature-Dependent X-ray Photoelectron SpectroscopyMacromolecules, 1995
- Mutual diffusion in the miscible polymer blend polystyrene/poly(xylenyl ether)Macromolecules, 1988
- Molecular interpretation of glass temperature depression by plasticizersJournal of Polymer Science Part A: General Papers, 1963