3D Printed Piezoelectric BaTiO3/Polyhydroxybutyrate Nanocomposite Scaffolds for Bone Tissue Engineering
Authors:
- Giovanna StrangisGSGiovanna Strangis
- Massimiliano LabardiMLMassimiliano Labardi
- Giuseppe GalloneGGGiuseppe Gallone
- Mario MilazzoMario Milazzo
- Simone CapaccioliSCSimone Capaccioli
- Francesca ForliFFFrancesca Forli
- Patrizia CinelliPatrizia Cinelli
- Stefano BerrettiniSBStefano Berrettini
- Maurizia SeggianiMaurizia Seggiani
- Serena DantiSerena Danti
- Paolo ParchiPPPaolo Parchi
Open Access
- 17 February 2024
- journal article
- research article
- Published by MDPI AG in Bioengineering
- Vol. 11 (2) , 193
Abstract
Bone defects are a significant health problem worldwide. Novel treatment approaches in the tissue engineering field rely on the use of biomaterial scaffolds to stimulate and guide the regeneration of damaged tissue that cannot repair or regrow spontaneously. This work aimed at developing and characterizing new piezoelectric scaffolds to provide electric bio-signals naturally present in bone and vascular tissues. Mixing and extrusion were used to obtain nanocomposites made of polyhydroxybutyrate (PHB) as a matrix and barium titanate (BaTiO3) nanoparticles as a filler, at BaTiO3/PHB compositions of 5/95, 10/90, 15/85 and 20/80 (w/w%). The morphological, thermal, mechanical and piezoelectric properties of the nanocomposites were studied. Scanning electron microscopy analysis showed good nanoparticle dispersion within the polymer matrix. Considerable increases in the Young’s modulus, compressive strength and the piezoelectric coefficient d31 were observed with increasing BaTiO3 content, with d31 = 37 pm/V in 20/80 (w/w%) BaTiO3/PHB. 3D printing was used to produce porous cubic-shaped scaffolds using a 90° lay-down pattern, with pore size ranging in 0.60–0.77 mm and good mechanical stability. Biodegradation tests conducted for 8 weeks in saline solution at 37 °C showed low mass loss (∼4%) for 3D printed scaffolds. The results obtained in terms of piezoelectric, mechanical and chemical properties of the nanocomposite provide a new promising strategy for vascularized bone tissue engineering.Keywords
Funding Information
- University of Pisa (I56J20001060005)
This publication has 71 references indexed in Scilit:
- A Comprehensive Review on Barium Titanate Nanoparticles as a Persuasive Piezoelectric Material for Biomedical Applications: Prospects and ChallengesSmall, 2022
- Additive Manufacturing Approaches for Hydroxyapatite‐Reinforced CompositesAdvanced Functional Materials, 2019
- Production, ultrasonic extraction, and characterization of poly (3‐hydroxybutyrate) (PHB) usingBacillus megateriumandCupriavidus necatorPolymers for Advanced Technologies, 2018
- The roles of signaling pathways in bone repair and regenerationJournal of Cellular Physiology, 2017
- Third generation poly(hydroxyacid) composite scaffolds for tissue engineeringJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2016
- Increasing the elongation at break of polyhydroxybutyrate biopolymer: Effect of cellulose nanowhiskers on mechanical and thermal propertiesJournal of Applied Polymer Science, 2012
- Production of polyhydroxyalkanoates: the future green materials of choiceJournal of Chemical Technology & Biotechnology, 2010
- Vascularization in Bone Tissue Engineering: Physiology, Current Strategies, Major Hurdles and Future ChallengesMacromolecular Bioscience, 2009
- Fabrication of poly(α‐hydroxy acid) foam scaffolds using multiple solvent systemsJournal of Biomedical Materials Research, 2001
- Elasticity, piezoelectricity and crystal lattice dynamicsJournal of Elasticity, 1972