Quantifying the influence of temperature setpoints, building and system features on energy consumption
- 1 December 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1000-1011
Abstract
HVAC systems are the major energy consumers in commercial buildings in the United States. Selection of setpoints impacts the amount of energy consumed by these systems. However, the influence of temperature setpoints on energy consumption and the potential energy savings are not yet fully identified. Through simulation this paper provides a systematic approach for quantifying the influence of different factors (i.e., construction category, climate, setpoint, and deadband) on building energy consumption. We implemented the approach on the medium-sized DOE reference office building of three construction categories in five climates using the EnergyPlus software. N-way ANOVA analysis ranked the factors as from the most influential to the least influential as: (1) construction category, (2) climate, (3) deadband, and (4) setpoint. Further analyses showed extending the deadband from 3 K to 6 K reduces energy consumption by 16.2%. Optimal annual setpoints varied across climates, and could lead to 6.63% average savings.Keywords
This publication has 12 references indexed in Scilit:
- An online learning approach for quantifying personalized thermal comfort via adaptive stochastic modelingBuilding and Environment, 2015
- An Empirical Comparison of Internal and External Load Profile Codebook Coverage of Building Occupant Energy-Use Behavior2015
- A knowledge based approach for selecting energy-aware and comfort-driven HVAC temperature set pointsEnergy and Buildings, 2014
- Energy Savings Modeling of Standard Commercial Building Re-tuning Measures: Large Office Buildings2012
- U.S. Department of Energy Commercial Reference Building Models of the National Building Stock2011
- EnergyPlus Simulation Speedup Using Data Parallelization Concept2010
- Adaptation and Thermal Environment2009
- Predictive controllers for thermal comfort optimization and energy savingsEnergy and Buildings, 2008
- Technical Support Document: Development of the Advanced Energy Design Guide for Small Office Buildings2006
- Adaptive thermal comfort and sustainable thermal standards for buildingsEnergy and Buildings, 2002