Experimental Forced Convection Study Using a Triply Periodic Minimal Surface Porous Structure with a Nanofluid: Comparison with Numerical Modeling
Open Access
- 28 August 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (17) , 7594
Abstract
Triply periodic minimal surfaces (TPMSs) show potential as porous materials in different engineering applications. Amongst them, heat sink is the subject of this paper. The advantage of such a structure is the ability to design it based on the intended applications. In the present paper, an attempt is made to experiment with a better understanding of the performance of TPMSs in heat sink applications. The experiment was conducted for different flow rates, and two heat sink materials, aluminum and silver, were used. In addition, two fluids were used experimentally: The first was water, and the second was a mixture of water containing 0.6% aluminum nanoparticles and identified as a nanofluid. The applied heat flux was maintained constant at 30,800 W/m2. The results reveal experimentally and confirm numerically that the TPMS structure secures a uniform heat extraction in the system. The development of the boundary layer in the porous structure is reduced due to the current structure design. A higher Nusselt number is obtained when the nanofluid is used as the circulating fluid. The performance evaluation criteria in the presence of the nanofluid exceed 100.Keywords
Funding Information
- NSERC (RGPIN-2020-07021)
This publication has 16 references indexed in Scilit:
- Numerical and experimental investigations on the thermal-hydraulic performance of heat exchangers with Schwarz-P and gyroid structuresInternational Journal of Thermal Sciences, 2023
- A review of multi-phase and single-phase models in the numerical simulation of nanofluid flow in heat exchangersEngineering Analysis with Boundary Elements, 2022
- Flow Characterization in Triply Periodic Minimal Surface (TPMS)-Based Porous Geometries: Part 1—HydrodynamicsTransport in Porous Media, 2022
- Analysis on the convective heat transfer process and performance evaluation of Triply Periodic Minimal Surface (TPMS) based on Diamond, Gyroid and IwpInternational Journal of Heat and Mass Transfer, 2022
- On the assessment of the thermal performance of microchannel heat sink with nanofluidInternational Journal of Heat and Mass Transfer, 2022
- Two-phase simulation of a shell and tube heat exchanger filled with hybrid nanofluidEngineering Analysis with Boundary Elements, 2022
- Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusionJournal of the Mechanical Behavior of Biomedical Materials, 2020
- Two-phase simulation of nanofluid flow in a heat exchanger with grooved wallJournal of Thermal Analysis and Calorimetry, 2020
- 3D printing for membrane separation, desalination and water treatmentApplied Materials Today, 2020
- Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface LatticesAdvanced Engineering Materials, 2019