Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine
Authors:
- 1 February 1989
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper describes a simplified three-dimensional modeling of the mixture formation and combustion processes in a direct injection (D.I.) diesel engine. The fuel-air mixing and combustion processes in the D.I. diesel engine can be characterized by the combined effects of some processes, such as spray trajectory, fuel vaporization, gas motion, combustion, and dispersion of gaseous components and enthalpy. Each process was computed by a simple sub-model based on the experimental results and empirical equations. The dispersion process was, however, computed by solving the conservation equations of the gaseous components and enthalpy by the finite difference technique. The sub-models were combined for predicting the three-dimensional distributions of the gaseous components and the temperature in the combustion chamber, and finally the cylinder pressure, heat release rate, engine performance and pollutant emissions (NO and soot). An application of this model was made to a small D.I. diesel engine with a bore of 78 mm and a stroke of 86 mm. The computation was made under various intake swirl ratios and piston cavity diameters. Reasonable agreement between computed and experimental results for these engine variables demonstrate that, with appropriate adjustments to the empirical coefficients of each model, the model produces qualitatively realistic predictions of the in-cylinder processes and engine performance.Keywords
This publication has 8 references indexed in Scilit:
- Fuel Spray Trajectory and Dispersion in a D.I. Diesel Combustion ChamberSAE International Journal of Advances and Current Practices in Mobility, 1989
- A stochastic approach to model the combustion process in direct-injection diesel enginesSymposium (International) on Combustion, 1985
- Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions : Part 2 Computational Procedure and Parametric StudyBulletin of JSME, 1983
- Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions : Part 1 Combustion ModelingBulletin of JSME, 1983
- Laminar and turbulent gas dynamics in combustors—current statusProgress in Energy and Combustion Science, 1978
- The calculation of low-Reynolds-number phenomena with a two-equation model of turbulenceInternational Journal of Heat and Mass Transfer, 1973
- Coagulation and combustion of soot particles in diesel enginesCombustion and Flame, 1971
- Air Swirl in a Road-Vehicle Diesel EngineProceedings of the Institution of Mechanical Engineers: Automobile Division, 1962