Development of High-Performance Polycrystalline CVD Diamond-Coated Cutting Tools Using Femtosecond Lasers
Open Access
- 5 July 2021
- journal article
- research article
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 15 (4) , 413-421
Abstract
Pulse laser grinding (PLG), an edge-shaping process, was developed previously to implement high-performance cutting tools. In this study, two femtosecond (fs) lasers with wavelengths of 1045 nm and 257 nm were used to conduct PLG on chemical vapor deposited (CVD) diamond-coated tool edges, as the fs laser is reported to have less thermal impact and the potential to improve the material crystallinity. We investigated the effects of the laser parameters on the tool edge formation and microstructural changes. The results show that although the infrared fs laser could – compared to the conventional nanosecond (ns)-laser PLG – naturally suppress surface thermal damage, the roughness of the processed surface remained relatively high with an Rz of 0.21 μm. However, under the optimal laser parameters proposed in this paper, an ultraviolet fs-laser PLG was used to obtain a much smoother edge, reducing Rz to approximately 0.08 μm. Moreover, scanning electron microscopy images indicated that the longitudinal machining marks on the ns-laser-processed surface were significantly reduced, with virtually no attached debris on the surface. Furthermore, from the Raman spectra, a significant increase in the diamond peak intensity was observed, indicating that the crystallinity of the CVD diamond (CVDD) was improved following ultraviolet-fs-laser PLG. These results demonstrate that edge shaping and structural modification of polycrystalline CVDDs can be integrated into ultraviolet-fs-laser PLG.Keywords
Funding Information
- Amada Foundation (AF-2019232-C2)
This publication has 20 references indexed in Scilit:
- Micromachining of polycrystalline CVD diamond-coated cutting tool with femtosecond laserJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2020
- Fabrication of CVD diamond micro-milling tool by hybrid machining of laser-induced graphitization and precision grindingCeramics International, 2019
- Micro tool design and fabrication: A reviewJournal of Manufacturing Processes, 2018
- High Precision Turning of Hardened Steel by Use of PcBN Insert Sharpened with Short Pulse LaserKey Engineering Materials, 2015
- An experimental investigation on micro-milling of polymethyl methacrylate components with nanometric surface roughnessProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013
- Using Pulse Laser Processing to Shape Cutting Edge of PcBN Tool for High-Precision Turning of Hardened SteelInternational Journal of Automation Technology, 2013
- Finishing of polycrystalline diamond tools by combining laser ablation with grindingProduction Engineering, 2013
- Laser in micro and nanoprocessing of diamond materialsLaser & Photonics Reviews, 2012
- Fabrication of polycrystalline diamond microtool using a Q-switched Nd:YAG laserThe International Journal of Advanced Manufacturing Technology, 2009
- Surface functionalization and physicochemical characterization of diamond nanoparticlesCurrent Applied Physics, 2009