Strong and macroporous calcium phosphate cement: Effects of porosity and fiber reinforcement on mechanical properties
Authors:
- 16 August 2001
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 57 (3) , 457-466
Abstract
Because of its excellent osteoconductivity and bone-replacement capability, self-setting calcium phosphate cement (CPC) has been used in a number of clinical procedures. For more rapid resorption and concomitant osseointegration, methods were desired to build macropores into CPC; however, this decreased its mechanical properties. The aims of this study, therefore, were to use fibers to strengthen macroporous CPC and to investigate the effects of the pore volume fraction on its mechanical properties. Water-soluble mannitol crystals were incorporated into CPC paste; the set CPC was then immersed in water to dissolve mannitol, producing macropores. Mannitol/(mannitol + CPC powder) mass fractions of 0, 10, 20, 30, and 40% were used. An aramid fiber volume fraction of 6% was incorporated into the CPC–mannitol specimens, which were set in 3 mm × 4 mm × 25 mm molds and then fractured in three-point flexure to measure the strength, work of fracture, and modulus. The dissolution of mannitol created well-formed macropores, with CPC at 40% mannitol having a total porosity of a 70.8% volume fraction. Increasing the mannitol content significantly decreased the properties of CPC without fibers (analysis of variance; p < 0.001). The strength (mean ± standard deviation; n = 6) of CPC at 0% mannitol was 15.0 ± 1.8 MPa; at 40% mannitol, it decreased to 1.4 ± 0.4 MPa. Fiber reinforcement improved the properties, with the strength increasing threefold at 0% mannitol, sevenfold at 30% mannitol, and nearly fourfold at 40% mannitol. The work of fracture increased by 2 orders of magnitude, but the modulus was not changed as a result of fiber reinforcement. A scanning electron microscopy examination of specimens indicated crack deflection and bridging by fibers, matrix multiple cracking, and frictional pullout of fibers as the reinforcement mechanisms. Macroporous CPCs were substantially strengthened and toughened via fiber reinforcement. This may help extend the use of CPCs with macropores for bony ingrowth to the repair of larger defects in stress-bearing locations. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res 57: 457–466, 2001Keywords
This publication has 31 references indexed in Scilit:
- Osteoconduction at porous hydroxyapatite with various pore configurationsBiomaterials, 2000
- Fiber Reinforced Calcium Phosphate CementArtificial Organs, 2000
- BioceramicsJournal of the American Ceramic Society, 1998
- Porous Materials for Bone EngineeringMaterials Science Forum, 1997
- The effects of centrifugation and titanium fiber reinforcement on fatigue failure mechanisms in poly(methyl methacrylate) bone cementJournal of Biomedical Materials Research, 1995
- Screening of matrices and fibers for reinforced thermoplastics intended for dental applicationsJournal of Biomedical Materials Research, 1994
- Tissue EngineeringScience, 1993
- Acrylic resin reinforced with chopped high performance polyethylene fiber-properties and denture constructionDental Materials, 1993
- The fracture toughness of titanium‐fiber‐reinforced bone cementJournal of Biomedical Materials Research, 1992
- The use of continuous fiber reinforcement in dentistryDental Materials, 1992