Surface modification of Li-rich layered Li(Li0.17Ni0.25Mn0.58)O2 oxide with Li–Mn–PO4 as the cathode for lithium-ion batteries
Authors:
- 15 March 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (17) , 5262-5268
Abstract
Enhancement of the discharge capacity, high-rate capability, and cycle stability of the Li-rich layered Li(Li0.17Ni0.25Mn0.58)O2 oxide with a large specific capacity is highly significant for high energy lithium-ion batteries. In this work, the Li-rich layered Li(Li0.17Ni0.25Mn0.58)O2 oxide is prepared by a spray-drying method. The surface modification with the Li–Mn–PO4 is introduced onto Li-rich layered Li(Li0.17Ni0.25Mn0.58)O2 oxide for the first time. It is demonstrated that the surface of Li(Li0.17Ni0.25Mn0.58)O2 grains is coated with the thin amorphous Li–Mn–PO4 layer (5 wt%). With increasing calcination temperature after the surface coating, a strong interaction can be induced on the interface between the amorphous Li–Mn–PO4 layer and the top surface of Li(Li0.17Ni0.25Mn0.58)O2 grains. As anticipated, the discharge capacity and high-rate capability are obviously improved for the Li–Mn–PO4-coated sample after calcination at 400 °C, while excellent cycle stability is obtained for the Li–Mn–PO4-coated sample after calcination at 500 °C as compared with the as-prepared Li(Li0.17Ni0.25Mn0.58)O2 oxide during cycling. Apparently, the interface interaction between the amorphous Li–Mn–PO4 layer and the top surface of Li(Li0.17Ni0.25Mn0.58)O2 grains is responsible for the improvement of the reaction kinetics and the electrochemical cycle stability of Li–Mn–PO4-coated samples.Keywords
This publication has 46 references indexed in Scilit:
- Metal–Air Batteries with High Energy Density: Li–Air versus Zn–AirAdvanced Energy Materials, 2010
- Crystal Habit‐Tuned Nanoplate Material of Li[Li1/3–2x/3NixMn2/3–x/3]O2 for High‐Rate Performance Lithium‐Ion BatteriesAdvanced Materials, 2010
- Nanostructured Lithium Nickel Manganese Oxides for Lithium-Ion BatteriesJournal of the Electrochemical Society, 2010
- Multi-electron reaction materials for high energy density batteriesEnergy & Environmental Science, 2009
- Template-free synthesis of Li[Ni0.25Li0.15Mn0.6]O2nanowires for high performance lithium battery cathodeChemical Communications, 2008
- Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteriesJournal of Materials Chemistry, 2007
- Demonstrating Oxygen Loss and Associated Structural Reorganization in the Lithium Battery Cathode Li[Ni0.2Li0.2Mn0.6]O2Journal of the American Chemical Society, 2006
- Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteriesJournal of Materials Chemistry, 2005
- Understanding the Anomalous Capacity of Li/Li[Ni[sub x]Li[sub (1/3−2x/3)]Mn[sub (2/3−x/3)]]O[sub 2] Cells Using In Situ X-Ray Diffraction and Electrochemical StudiesJournal of the Electrochemical Society, 2002
- Issues and challenges facing rechargeable lithium batteriesNature, 2001