Fracture toughness of impact‐modified polymers based on the J‐integral
Authors:
- 1 May 1989
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 29 (10) , 671-678
Abstract
The fracture toughness characterization of four impact‐modified polymers based on the J‐integral concept was studied. We have discovered that the use of the “crack blunting line” concept needs revision. Direct measurements of the crack growth can be made (as opposed to indirect readings from the fracture surface) that test the applicability of the crack blunting concept. Our results indicate that for rubber‐toughened polymers the use of the blunting line fails to specify properly the critical J‐integral value for crack initiation.Keywords
This publication has 7 references indexed in Scilit:
- J testing of toughened nylonsJournal of Materials Science, 1987
- Fracture and toughness of crystalline polymer solidsPolymer Engineering & Science, 1987
- Fracture characterization of tough polymers using the J methodPolymer Engineering & Science, 1986
- A fracture toughness study on low density and linear low density polyethylenesPolymer, 1986
- A model for predicting the influence of warm pre-stressing and strain ageing on the cleavage fracture toughness of ferritic steelsInternational Journal of Fracture, 1983
- Rubber toughening of plasticsJournal of Materials Science, 1980
- A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and CracksJournal of Applied Mechanics, 1968