Advanced smart tungsten alloys for a future fusion power plant
- 24 April 2017
- journal article
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 59 (6) , 064003
Abstract
The severe particle, radiation and neutron environment in a future fusion power plant requires the development of advanced plasma-facing materials. At the same time, the highest level of safety needs to be ensured. The so-called loss-of-coolant accident combined with air ingress in the vacuum vessel represents a severe safety challenge. In the absence of a coolant the temperature of the tungsten first wall may reach 1200 °C. At such a temperature, the neutron-activated radioactive tungsten forms volatile oxide which can be mobilized into atmosphere. Smart tungsten alloys are being developed to address this safety issue. Smart alloys should combine an acceptable plasma performance with the suppressed oxidation during an accident. New thin film tungsten–chromium–yttrium smart alloys feature an impressive 10 5 fold suppression of oxidation compared to that of pure tungsten at temperatures of up to 1000 °C. Oxidation behavior at temperatures up to 1200 °C, and reactivity of alloys in humid atmosphere along with a manufacturing of reactor-relevant bulk samples, impose an additional challenge in smart alloy development. First exposures of smart alloys in steady-state deuterium plasma were made. Smart tungsten–chroimium–titanium alloys demonstrated a sputtering resistance which is similar to that of pure tungsten. Expected preferential sputtering of alloying elements by plasma ions was confirmed experimentally. The subsequent isothermal oxidation of exposed samples did not reveal any influence of plasma exposure on the passivation of alloys.Keywords
This publication has 21 references indexed in Scilit:
- Development of yttrium-containing self-passivating tungsten alloys for future fusion power plantsNuclear Materials and Energy, 2016
- Materials for DEMO and reactor applications—boundary conditions and new conceptsPhysica Scripta, 2015
- Effect of Y2O3 Addition on Oxidation Behavior of W-Cr AlloysMetallurgical and Materials Transactions A, 2015
- Impurity seeding for tokamak power exhaust: from present devices via ITER to DEMOPlasma Physics and Controlled Fusion, 2013
- Recent progress in research on tungsten materials for nuclear fusion applications in EuropeJournal of Nuclear Materials, 2013
- Oxidation behaviour of silicon-free tungsten alloys for use as the first wall materialPhysica Scripta, 2011
- Self passivating W-based alloys as plasma-facing materialJournal of Nuclear Materials, 2009
- Self passivating W-based alloys as plasma facing material for nuclear fusionPhysica Scripta, 2007
- The influence of yttrium ion implantation on the oxidation behaviour of powder metallurgically produced chromiumSurface and Coatings Technology, 1996
- Grain Boundary Segregation of Yttrium in Chromia ScalesJournal of the Electrochemical Society, 1988