Generalized Predictive Control With Actuator Deadband for Event-Based Approaches
- 25 June 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 10 (1) , 523-537
Abstract
This work presents an event-based control structure using the generalized predictive control (GPC) algorithm with actuator deadband. The main objective of this work is to limit the number of controlled system updates. In this approach, the controlled process is sampled with a constant sampling time and is updated in an asynchronous way that depends on the obtained control signal value. To achieve the desired control properties, a hybrid system framework is used to model the virtual actuator deadband. The deadband is modeled as system input constraints in the GPC's optimization procedure, exploring mixed integer quadratic programming (MIQP) techniques. The presented control structure considers adjustable actuator deadband as an additional tuning parameter and allows a tradeoff between control performance and the number of events/updates. This fact is very important for the lifetime of the actuators and minimizes their wear, especially for mechanical and electromechanical systems. The minimization of actuator usage can be also understood as an economical saving. Other benefits can be found in distributed control systems, where various control system agents are connected through computer networks, and where a reduction in communication is always welcome.Keywords
This publication has 27 references indexed in Scilit:
- Characterization of symmetric send-on-delta PI controllersJournal of Process Control, 2012
- Networked Control With State Reset and Quantized Measurements: Observer-Based CaseIEEE Transactions on Industrial Electronics, 2012
- Integrated Network-Based Model Predictive Control for Setpoints Compensation in Industrial ProcessesIEEE Transactions on Industrial Informatics, 2012
- Packetized Predictive Control of Stochastic Systems Over Bit-Rate Limited Channels With Packet LossIEEE Transactions on Automatic Control, 2011
- Wireless Model-Based Predictive Networked Control System Over Cooperative Wireless NetworkIEEE Transactions on Industrial Informatics, 2010
- Experimental implementation of a networked input-output sporadic control system2010
- Error Bounded Sensing for Packet-Based Networked Control SystemsIEEE Transactions on Industrial Electronics, 2010
- Model Predictive Control Tuning Methods: A ReviewIndustrial & Engineering Chemistry Research, 2010
- Sporadic event-based control of first-order linear stochastic systemsAutomatica, 2008
- On limit cycles in event-based control systems2007