Effect of Bond-Slip on the Crack Bridging Capacity of Steel Fibers in Cement-Based Composites
- 1 September 2008
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 20 (9) , 588-598
Abstract
To increase the crack bridging capacity of concretes and mortars, fibers are often added to cement-based matrices. As a result, the fracture energy of a fiber-reinforced concrete (FRC) is the sum of the cohesive forces of the matrix and of the pullout resistance given by the fibers crossing the crack. In the case of fibers randomly inclined with respect to crack surfaces, the so-called frictional snubbing effect must be added to the previous contributions, if the energy released during crack growth has to be computed. Of course, snubbing forces are not present when fibers are perfectly orthogonal to crack surfaces. As the classical formulas are not always effective in the evaluation of snubbing phenomenon, a cohesive interface model is here proposed for a more precise definition of the frictional snubbing forces. The model is able to predict adequately the experimental results obtained by pulling out steel fibers at different inclinations angles from cement-based matrices. By analyzing fibers with different bond properties, the proposed model can be also used to define the crack bridging capacity of both bonded and unbonded steel fibers. Moreover, it seems to suggest a more simplified approach for the definition of the postcracking response of FRC.Keywords
This publication has 16 references indexed in Scilit:
- A Cohesive Interface Model for the Pullout of Inclined Steel Fibers in Cementitious MatrixesJournal of Advanced Concrete Technology, 2007
- CARDIFRC® – Development and mechanical properties. Part III: Uniaxial tensile response and other mechanical propertiesMagazine of Concrete Research, 2005
- Optimal Steel Fiber Strength for Reinforcement of Cementitious MaterialsJournal of Materials in Civil Engineering, 1999
- The fibre pull-out energy of misaligned short fibre compositesJournal of Materials Science, 1997
- Pullout of Inclined Flexible Fiber in Cementitious CompositeJournal of Engineering Mechanics, 1997
- Identification of Stress-Slip Law for Bar or Fiber Pullout by Size Effect TestsJournal of Engineering Mechanics, 1995
- Effect of fiber inclination on crack bridging stress in brittle fiber reinforced brittle matrix compositesJournal of the Mechanics and Physics of Solids, 1992
- Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrixComposites, 1990
- Plasticity for Structural Engineers1988
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976