Operation of a Sealed-Tube-Vircator High-Power-Microwave Source
Authors:
- 6 April 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 40 (6) , 1618-1621
Abstract
The high-power-microwave (HPM) sources currently under development typically require constant pumping to maintain the high vacuum levels required for operation. This pumping is often done with either a cryo- or turbopumping system, either of which would be difficult to deploy in a compact portable system. A compact sealed-tube virtual cathode oscillator (vircator) source has been developed at Texas Tech University (TTU) that does not require a bulky external vacuum pump for operation. This device has a base vacuum pressure in the low range compared to the majority of laboratory HPM sources having vacuum levels in the - range. The reduced amount of trapped gasses in the sealed-tube ultrahigh-vacuum environment has the potential to greatly impact device performance. The TTU sealed-tube vircator is useful as a testbed for studying HPM source optimization under UHV conditions. Measured operational characteristics of the tube utilizing a carbon fiber cathode and a nickel anode are presented, along with radiated microwave measurements.Keywords
This publication has 8 references indexed in Scilit:
- Initial anode optimization for a compact sealed tube vircator2011
- COMSED 1 — A compact, gigawatt class microwave source utilizing helical flux compression generator based pulsed power2010
- Plasma characterization on carbon fiber cathode by spectroscopic diagnosticsChinese Physics B, 2009
- Performance of a compact triode vircator and Marx generator system2009
- Plasma-induced evolution behavior of space-charge-limited current for multiple-needle cathodesPlasma Sources Science and Technology, 2008
- Plasma characterization in a diode with a carbon-fiber cathodeApplied Physics Letters, 2008
- Review of Cold Cathode Research at the Air Force Research LaboratoryIEEE Transactions on Plasma Science, 2008
- Gas evolution during operation of a CsI-coated carbon fiber cathode in a closed vacuum systemIEEE Transactions on Plasma Science, 2005