Bioactivation of a cobalt alloy by coating with wollastonite during investment casting
- 5 April 2006
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 78A (1) , 34-41
Abstract
Cobalt alloy samples were bioactivated during investment casting. The cavities of the investment mold were previously coated with wollastonite. Additionally, before coating with wollastonite, some mold cavities were filled out with graphite rods to avoid a chemical reaction between the wollastonite powder and the investment material. Half of the cast samples were heat treated at 1220°C for 1 h. To perform the in vitro bioactivity assessment, the cast and heat‐treated samples were immersed in a simulated body fluid solution (SBF) for a period of 21 days. The surface of the samples before and after immersion in SBF was characterized by SEM, EDX, and XRD analyses. During the casting, particles of pseudowollastonite were embedded on the metallic surface. After immersion of the samples in SBF, a ceramic layer was formed on both the alloy obtained by using the investment mold and the alloy obtained by using the graphite‐filled cavity. The ceramic layer was thicker on the alloy cast in the investment mold. The layer was identified as hydroxyapatite by XRD analysis, in all the cases. The heat‐treated samples after immersion in SBF showed the formation of a thin homogeneous layer consisting of fine grains of apatite. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res, 2006Keywords
This publication has 29 references indexed in Scilit:
- Use of Wollastonite in a Biomimetic Method to Promote Apatite Formation on a Co-Cr-Mo AlloyKey Engineering Materials, 2005
- Apatite formation on the surface of wollastonite/tricalcium phosphate composite immersed in simulated body fluidJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Morphology of apatite formed on surface of wollastonite coating soaked in simulate body fluidMaterials Letters, 2002
- Thick hydroxyapatite coatings by electrophoretic depositionMaterials Letters, 2002
- Material fundamentals and clinical performance of plasma‐sprayed hydroxyapatite coatings: A reviewJournal of Biomedical Materials Research, 2001
- Bioactivity of a CaO−SiO2 Binary Glasses SystemChemistry of Materials, 2000
- Dip Coating of Calcium Hydroxyapatite on Ti‐6Al‐4V SubstratesJournal of the American Ceramic Society, 2000
- Preparation and Characterization of Hydroxyapatite Coatings on Ti6Al4V Alloy by a Sol‐Gel MethodJournal of the American Ceramic Society, 1999
- Phase Diagram of Wollastonite—Tricalcium PhosphateJournal of the American Ceramic Society, 1995
- Growth of a Bonelike Apatite Layer on a Substrate by a Biomimetic ProcessJournal of the American Ceramic Society, 1995