Effect of C2H2/H2 Gas Mixture Ratio in Direct Low-Temperature Vacuum Carburization
Open Access
Abstract
The effect of the acetylene and hydrogen gases mixture ratios in direct low-temperature vacuum carburization was investigated. The gas ratio is an important parameter for producing free radicals in carburization. The free radicals can remove the natural oxide film by strong reaction of the hydrocarbons, and then thermodynamic activity can be increased. When the gas ratio was below one, carbon-supersaturated expanded austenite layers were formed on the surface of the AISI 316L stainless steel, which had a maximum carbon solubility up to 11.5 at% at 743 K. On the other hand, when the gas ratio was above one, the carbon concentration of the layers was low even if the process time was increased enough to reach the maximum carbon solubility. As a result, the carbon concentration underneath the surface was determined to be highly dependent on the gas mixture ratio of acetylene and hydrogen. In conclusion, it is necessary to restrict the ratio of acetylene and hydrogen gases in the total mixture of gases to form an expanded austenite layer with high carbon concentration in direct low-temperature vacuum carburization.Keywords
All Related Versions
Funding Information
- Korea Institute of Industrial Technology (JG180011)
This publication has 23 references indexed in Scilit:
- Behavior of the S-phase of plasma nitrocarburized 316L austenitic stainless steel on changing pulse frequency and discharge voltage at fixed pulse-off timeSurface and Coatings Technology, 2016
- Thermodynamic Simulation of Low Temperature Colossal Carburization of Austenitic Stainless SteelProcedia Engineering, 2015
- Enhanced Corrosion Resistance of Stainless Steel Carburized at Low TemperatureMetallurgical and Materials Transactions A, 2009
- Enhanced Carbon Diffusion in Austenitic Stainless Steel Carburized at Low TemperatureMetallurgical and Materials Transactions A, 2009
- Carbon supersaturation due to paraequilibrium carburization: Stainless steels with greatly improved mechanical propertiesActa Materialia, 2006
- Surface material design of 316 stainless steel by combination of low temperature carburizing and nitridingSurface and Coatings Technology, 2005
- Colossal carbon supersaturation in austenitic stainless steels carburized at low temperatureActa Materialia, 2003
- Surface engineering of austenitic stainless steelSurface Engineering, 2002
- Effects of cold work on the oxidation behavior and carburization resistance of Alloy 800Materials and Corrosion, 1987
- A study on the solubility and distribution of carbon in oxidesSolid State Communications, 1985