Experimental Thermal Response Study of Multilayered, Encapsulated, PCM-Integrated Building Construction Materials
Open Access
Abstract
Thermal energy storage integration using phase change materials (PCMs) in buildings has great potential for energy conservation and greenhouse gas (GHG) emission reduction. Cutting-edge research and innovative ideas are required when using multilayered PCMs within typical construction materials to take advantage of their heat storage capability over a wide temperature range within buildings. This current study was carried out to experimentally test the efficacy of using dual PCMs RT28HC and RT21HC with different melting temperature ranges (28 °C and 21 °C) under variable thermal loading. The transient thermal response of various PCM-based configurations of concrete and cement blocks at different temperature inputs was obtained to determine the effectiveness of dual PCMs and their optimized configuration under experimental laboratory conditions. The range of the temperature input was varied from 22 °C to 50 °C, suitable for hot climatic conditions such as those in Pakistan. Laboratory ambient temperatures remained at ~17 °C for all experimental tests. Moreover, the results were compared using two parameters, i.e., decrement factor (DF) and time lag (TL). With DF and TL values of 0.10 and 5.72, respectively, in the high-temperature heating (HTH) regime and a low DF value of 0.08 and high TL of 5.17 in the moderate-temperature heating (MTH) regime, the RT28HC–RT21HC combination proved to be the most effective. The application of the RT28HC–RT21HC combination provided up to a 54.3% reduction in indoor temperatures in the HTH regime. This research contributes through experimental validation that these novel configurations are capable of providing substantial improvement in indoor thermal comfort.Keywords
This publication has 24 references indexed in Scilit:
- Phase change materials and thermal energy storage for buildingsEnergy and Buildings, 2015
- Numerical study on the thermal performance of building wall and roof incorporating phase change material panel for passive cooling applicationEnergy and Buildings, 2014
- Thermal analysis of a ventilated facade with PCM for cooling applicationsEnergy and Buildings, 2013
- Dynamics of external wall structures with a PCM (phase change materials) in high latitude countriesEnergy, 2013
- A conceptual model that simulates the influence of thermal inertia in building structuresEnergy and Buildings, 2013
- Experimental study of small-scale solar wall integrating phase change materialSolar Energy, 2012
- Materials used as PCM in thermal energy storage in buildings: A reviewRenewable and Sustainable Energy Reviews, 2011
- The influence of the external walls thermal inertia on the energy performance of well insulated buildingsEnergy and Buildings, 2009
- Experimental study of under-floor electric heating system with shape-stabilized PCM platesEnergy and Buildings, 2005
- Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildingsEnergy and Buildings, 2004