J Integral Estimation Procedures
Authors:
- 1 January 1972
- book chapter
- Published by ASTM International
- p. 40-69
Abstract
By making use of plastically adjusted linear elastic fracture mechanics analysis and plastic limit load solutions, a method is developed for reasonable approximation of Rice's path independent J integral which is applicable for test specimens or other configurations which exhibit considerable plasticity prior to fracture. Employing this, J is expressed as a function of load point displacement. Estimations of the J versus displacement relationships developed compared quite well to those previously established experimentally at Westinghouse Research Laboratories for Ni-Cr-Mo-V and A533B steels. For these comparisons, the test specimen configurations considered were three point bend, center notch, and compact tension test specimen configurations, all of which exhibit significantly different plastic limit load slip line flow fields. Thus, the method developed for approximating J is thought to be widely applicable.Keywords
This publication has 5 references indexed in Scilit:
- The Effect of Specimen Geometry on JIc1972
- Small scale yielding near a crack in plane strain: A finite element analysisInternational Journal of Fracture, 1971
- State of the art of the WOL specimen for fracture toughness testingEngineering Fracture Mechanics, 1968
- Plane Strain Crack Toughness Testing of High Strength Metallic Materials1966
- Initial plastic yielding in notch bend testsJournal of the Mechanics and Physics of Solids, 1956