ANALYTICAL AND COMPARATIVE INVESTIGATION OF PARTICULATE SIZE EFFECT ON SLURRY FLOW CHARACTERISTICS USING COMPUTATIONAL FLUID DYNAMICS
- 1 January 2021
- journal article
- research article
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 7 (1) , 220-239
Abstract
The key issue associated with the industries is the transportation and dumping of solids particulates in the form of slurry at the desired place using long length pipelines. In this perspective, numerical simulation of three-dimensional horizontal slurry pipeline of 0.0549 m diameter using Eulerian two-phase model with RNG k-ɛ turbulence closure is carried out. The glass - beads solid particulates having density ( = 2470 kg/m3) and slurry concentration varies as 10% to 50% (by volume) for velocity ranges of 3-5 ms-1. The computational modeling is done using available commercial software ANSYS Fluent for 125µm and 440 µm particulate size at different velocity and concentration range to know their effect on slurry flow characteristics. It is observed that for chosen particulate size pressure drop increases with increase in velocity at all solid concentration range. The pressure drop in slurry for 440 µm solid particulates is found higher as compared to the pressure drop of 125 µm solid particulates slurry. The percentage change in pressure drop is also reported in the paper due to particulate size effect at all velocity and solid concentration. The obtained results of predicted pressure drop are analytically compared with the available experimental results of literature and are in synchronism with that. A parametric study is carried out with the aim of visualizing and understanding the solid particulate size effect on slurry flow characteristics. Finally, the results of settling solid concentration contour, velocity contour, concentration profiles, velocity profiles and vector representation of concentration/velocity were also predicted for chosen particulates sized slurry.Keywords
This publication has 39 references indexed in Scilit:
- Flow of mono-dispersed particles through horizontal bendInternational Journal of Multiphase Flow, 2013
- CFD modeling for pipeline flow of fine particles at high concentrationInternational Journal of Multiphase Flow, 2012
- Numerical investigation of slush nitrogen flow in a horizontal pipeChemical Engineering Science, 2012
- Influence of Chemical Reagents on Rheological Properties of Fly Ash-Water Slurry at Varying Temperature EnvironmentCoal Combustion and Gasification Products, 2011
- Effect of Additive on Pressure Drop and Rheological Characteristics of Fly Ash Slurry at High ConcentrationParticulate Science and Technology, 2009
- Prediction of Flow Characteristics of Bimodal Slurry in Horizontal Pipe FlowParticulate Science and Technology, 2008
- Experimental investigation for near-wall lift of coarser particles in slurry pipeline using γ-ray densitometerPowder Technology, 2007
- Pressure drops and flow patterns in sand-mixture pipesExperimental Thermal and Fluid Science, 2002
- The entry length for slurries in horizontal pipeline flowThe Canadian Journal of Chemical Engineering, 1988
- FRICTION LOSSES FOR FLOW OF SLURRIES IN PIPELINE BENDS, FITTINGS, AND VALVESParticulate Science and Technology, 1983