Low‐Temperature Creep of Nanocrystalline Titanium(IV) Oxide
Authors:
- 1 November 1991
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 74 (11) , 2918-2921
Abstract
Nanocrystalline TiO2 with densities higher than 99% of rutile has been deformed in compression without fracture at temperatures between 600° and 800°C. The total strains exceed 0.6 at strain rates as high as 10−3 s−1. The original average grain size of 40 nm increases during the creep deformation to final values in the range of 120 to 1000 nm depending on the temperature and total deformation. The stress exponent of the strain rate, n, is approximately 3 and the grain size dependence is d−q with q in the range of 1 to 1.5. It is concluded that the creep deformation occurs by an interface reaction controlled mechanism.Keywords
This publication has 15 references indexed in Scilit:
- Development of Superplastic Structural CeramicsJournal of the American Ceramic Society, 1990
- Sintering characteristics of nanocrystalline TiO2Journal of Materials Research, 1990
- A superplastic covalent crystal compositeNature, 1990
- Superplasticity of Yttria-Stabilized Tetragonal ZrO2PolycrystalsAdvanced Ceramic Materials, 1986
- Superplastic Flow in Fine‐Grained AluminaJournal of the American Ceramic Society, 1986
- Mechanism of Superplastic Flow in a Fine-Grained Ceramic Containing Some Liquid PhaseJournal of the American Ceramic Society, 1984
- Hot‐Working of Aluminum Oxide: I, Primary Recrystallization and TextureJournal of the American Ceramic Society, 1969
- Theory of the tensile testActa Metallurgica, 1967
- A Model for Boundary Diffusion Controlled Creep in Polycrystalline MaterialsJournal of Applied Physics, 1963
- Diffusional Viscosity of a Polycrystalline SolidJournal of Applied Physics, 1950