Thermal decomposition characteristics of foundry sand for cast iron in nitrogen atmosphere
Open Access
- 12 December 2018
- journal article
- research article
- Published by The Royal Society in Royal Society Open Science
- Vol. 5 (12) , 181091
Abstract
Sand casting, currently the most popular approach to the casting production, has wide adaptability and low cost. The thermal decomposition characteristics of foundry sand for cast iron were determined for the first time in this study. Thermogravimetry was monitored by simultaneous thermal analyser to find that there was no obvious oxidation or combustion reaction in the foundry sand; the thermal decomposition degree increased as the heating rate increased. There was an obvious endothermic peak at about 846 K due to the transition of quartz from β to α phase. A novel technique was established to calculate the starting temperature of volatile emission in determining the volatile release parameter of foundry sand for cast iron. Foundry sand does not readily evaporate because its volatile content is only about 2.68 wt% and its main components have high-temperature stability. The thermal decomposition kinetics parameters of foundry sand, namely activation energy and pre-exponential factor, were obtained under kinetics theory. The activation energy of foundry sand for cast iron was small, mainly due to the wide temperature range of thermal decomposition in the foundry sand.Keywords
Funding Information
- the national key Research and Development Program of China (2017YFC0805100)
- Basic Scientific Research Program of China Academy of Safety Science and Technology (2017JBKY12)
This publication has 27 references indexed in Scilit:
- Sand casting safety assessment for foundry enterprises: fault tree analysis, Heinrich accident triangle, HAZOP–LOPA, bow tie modelRoyal Society Open Science, 2018
- Assessment of air quality using a cloud model methodRoyal Society Open Science, 2018
- Mine safety assessment based on basic event importance: grey relational analysis and bow tie modelRoyal Society Open Science, 2018
- Safety assessment of petrochemical enterprise using the cloud model, PHA–LOPA and the bow-tie modelRoyal Society Open Science, 2018
- Focusing on the patterns and characteristics of extraordinarily severe gas explosion accidents in Chinese coal minesProcess Safety and Environmental Protection, 2018
- Mine safety assessment using gray relational analysis and bow tie modelPLOS ONE, 2018
- Retrospective and prospective analysis of the trends of energy use in Chinese iron and steel industryJournal of Cleaner Production, 2014
- Missing safety measures led to the jet fire and seven deaths at a steel plant in Turin. Dynamics and lessons learnedJournal of Loss Prevention in the Process Industries, 2013
- Estimates of the potential for energy conservation in the Chinese steel industryEnergy Policy, 2011
- An effectiveness evaluation of a multifaceted preventive intervention on occupational injuries in foundries: a 13-year follow-up study with interrupted time series analysisInternational Archives of Occupational and Environmental Health, 2011