Cooling Rate and Compositional Effects on Microstructural Evolution and Mechanical Properties of (CoCrCuTi)100−xFex High-Entropy Alloys
Open Access
Abstract
This study investigates the impact of cooling rate and alloy composition on phase formations and properties of (CoCrCuTi)100−xFex (x = 0, 5, 10, 12.5, 15) high-entropy alloys (HEAs). Samples were synthesized using arc-melting and electromagnetic levitation, followed by quenching through the use of a Cu chill or V-shaped Cu mold. Cooling rates were evaluated by measuring dendrite arm spacings (DASs), employing the relation DAS = k ɛ−n, where constants k = 16 and n = ½. Without Fe addition, a microstructure consisting of BCC1 + BCC2 phases formed, along with an interdendritic (ID) FCC Cu-rich phase. However, with the addition of 5–10% Fe, a Cu-lean C14 Laves phase emerged, accompanied by a Cu-rich ID FCC phase. For cooling rates below 75 K/s, alloys containing 10% Fe exhibited liquid phase separation (LPS), characterized by globular Cu-rich structures within the Cu-lean liquid. In contrast, for the same composition, higher cooling rates of 400–700 K/s promoted a dendritic/interdendritic microstructure. Alloys with 12.5–15 at. % Fe displayed LPS irrespective of the cooling rate, although an increase in uniformity was noted at rates exceeding 700 K/s. Vickers hardness and fracture toughness generally increased with Fe content, with hardness ranging from 444 to 891 HV. The highest fracture toughness (5.5 ± 0.4 KIC) and hardness (891 ± 66 HV) were achieved in samples containing 15 at. % Fe, cooled at rates of 25–75 K/s.Keywords
Funding Information
- National Science Foundation Graduate Research Fellowship Program (2019278110, P200A210028)
- Graduate Assistance in Areas of National Need (GAANN) Fellowship Program (2019278110, P200A210028)
- Winston Chung Global Energy Center (2019278110, P200A210028)
This publication has 41 references indexed in Scilit:
- Residual Stress and Distortion during Quench Hardening of Steels: A ReviewJournal of Materials Engineering and Performance, 2022
- Effect of Cooling Rate on the Phase Formation of AlCoCrFeNi High-Entropy AlloyJournal of Phase Equilibria and Diffusion, 2021
- High entropy alloys: A focused review of mechanical properties and deformation mechanismsActa Materialia, 2020
- A Comparative Study on Cooling Performance of Hot Oil and Molten Salt Quench Media for Industrial Heat TreatmentJournal of Materials Engineering and Performance, 2020
- Composition design of high entropy alloys using the valence electron concentration to balance strength and ductilityActa Materialia, 2018
- High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperaturesActa Materialia, 2017
- A critical review of high entropy alloys and related conceptsActa Materialia, 2017
- High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase DiagramsJOM, 2014
- Determination of fracture toughness using the area of micro-crack tracks left in brittle materials by Vickers indentation testJournal of Advanced Ceramics, 2013
- Decomposition in multi-component AlCoCrCuFeNi high-entropy alloyActa Materialia, 2011