Delamination of Ceramic Coatings with Embedded Metal Layers
- 17 March 2011
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 94 (s1) , s96-s103
Abstract
This paper investigates the effects of thin plastically deformable layers embedded in an elastic coating upon debonding of a multilayer from its substrate. Such coatings are normally deposited at high temperature and cooled to ambient, resulting in significant stresses from thermal expansion mismatch. Other stresses can develop during subsequent thermal cycling if volumetric changes such as phase changes or oxidation occur in the system. We present an elastic–plastic model to calculate these stresses in the adhered state (after deposition and cooling but before debonding) and the released state (after delamination). These results are used to calculate the steady‐state energy release rate (ERR) that drives debonding at the interface between the multilayer and the substrate. It is shown that plastic straining in the ductile layers can lead to significant reductions in crack driving force by dissipating energy both before and during coating release. Regime maps are developed to illustrate reductions in ERR in terms of the yield strength and volume fraction of the metal layers. As an example, the model is used to predict the impact of embedded platinum layers within an yttria‐stabilized zirconica coating; the crack ERR for the composite coating is shown to be 30% lower than that for a uniform ceramic coating.Keywords
This publication has 20 references indexed in Scilit:
- Synthesis and Drug Delivery Property of Calcium Phosphate Cement with Special Crystal MorphologyJournal of the American Ceramic Society, 2010
- A mechanism governing oxidation-assisted low-cycle fatigue of superalloysActa Materialia, 2009
- An analytical model of rumpling in thermal barrier coatingsJournal of the Mechanics and Physics of Solids, 2005
- Emerging materials and processes for thermal barrier systemsCurrent Opinion in Solid State and Materials Science, 2004
- Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coatingThin Solid Films, 2003
- Mechanisms controlling the durability of thermal barrier coatingsProgress in Materials Science, 2001
- Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidationActa Materialia, 2000
- Analysis of a wedge impression test for measuring the interface toughness between films/coatings and ductile substratesActa Materialia, 2000
- Nonlinear delamination mechanics for thin filmsJournal of the Mechanics and Physics of Solids, 1997
- Concept of Functionally Graded Materials for Advanced Thermal Barrier Coating ApplicationsJournal of the American Ceramic Society, 1996