Entropy generation rate analysis of turbocharger radial flow compressor in range from surge to choke
- 18 November 2023
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 238 (3) , 401-426
Abstract
This study compares the local losses of a radial compressor in the range from surge to choke considering shock phenomena, boundary layer separation, and mixing mechanisms. For this purpose, formulation of the local entropy generation rate (EGR) is added to the computational fluid dynamics (CFD) solver, which models the turbulent flow field of the compressor through the RANS approach. For validation, the numerical pressure rise curve of the compressor is compared with the experimental data. The results indicate that at the design point, the impeller, diffuser, and the volute account for approximately 50.8%, 30.0%, and 12.3% of the EGR, respectively, with approximately 5% in the impeller backspace, 1% in the diffuser cavity, and less than 0.5% in the inlet duct. Approaching the surge condition, local losses due to mixing and shock waves decline while boundary layer losses increase. Based on comprehensive analysis of the leading-edge boundary layer, the largest dead-air zone is found at the design point, resulting in a lower diffusion entrance loss and a higher mixing loss. Furthermore, the EGR variation in the diffuser channel is investigated by shedding light on mixing dynamics and classification of the channel flow regime into three different zones based on mixing ratio (MR). The outcomes show that the flow regime tends to mix more quickly at a higher MR, resulting in a slight decrease in EGR, which benefits compressor performance. We demonstrate that the mixing rate of flow regimes decreases in both the leading-edge boundary layer and the radial diffuser approaching the surge margin.Keywords
This publication has 43 references indexed in Scilit:
- Experimental and numerical investigations of radial flow compressor component lossesJournal of Mechanical Science and Technology, 2014
- Numerical and Experimental Studies of the Flow Field in a Cyclone DryerJournal of Fluids Engineering, 2006
- Entropy production calculation for turbulent shear flows and their implementation in cfd codesInternational Journal of Heat and Fluid Flow, 2005
- Detailed Flow Study of Mach Number 1.6 High Transonic Flow With a Shock Wave in a Pressure Ratio 11 Centrifugal Compressor ImpellerJournal of Turbomachinery, 2004
- Effect of velocity ratio on the turbulent mixing of confined, co-axial jetsExperimental Thermal and Fluid Science, 2000
- The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor RotorJournal of Turbomachinery, 1995
- A Distinction Between Different Types of Stall in a Centrifugal Compressor StageJournal of Engineering for Gas Turbines and Power, 1986
- Loss Sources and Magnitudes in Axial-Flow CompressorsJournal of Engineering for Power, 1976
- Behavior of Severely Asymmetric Flow in a Vaneless DiffuserJournal of Engineering for Power, 1975
- Losses in Vaneless Diffusers of Centrifugal Compressors and Pumps: Analysis, Experiment, and DesignJournal of Engineering for Power, 1966