Serpentine motion control of snake robots for curvature and heading based trajectory - parameterization
Authors:
- 1 July 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6, 536-541
Abstract
The control problem for the serpentine motion of a planar snake under the assumption of a trajectory characterized by its curvature and heading is examined in this article. The time varying curvature and heading attributes of the trajectory result in a sinusoidal reference signal for the joint angles. An inner loop PD-controller is used for trajectory tracking by compensating the effects of the snake's dynamics, while an outer loop first-order controller is used for the formation of the reference joint angles by tracking the desired heading and velocity. Simulation studies on spiral curves are included to investigate the efficiency of the controller.Keywords
This publication has 17 references indexed in Scilit:
- Crawling and rolling gaits for a coupled-mobility snake robot2011
- Waypoint guidance control of snake robots2011
- Path Following Control of Planar Snake Robots Using a Cascaded ApproachIEEE Transactions on Control Systems Technology, 2011
- Controllability and Stability Analysis of Planar Snake Robot LocomotionIEEE Transactions on Automatic Control, 2010
- Iterative feedback control of snake-like robot based on principal fibre bundle modellingInternational Journal of Advanced Mechatronic Systems, 2009
- Online trajectory generation in an amphibious snake robot using a lamprey-like central pattern generator modelProceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164), 2007
- Planning Algorithms2006
- Trajectory Tracking Control of Snake Robots Based on Dynamic Model2006
- Analysis and design of a multi-link mobile robot (Serpentine)2003
- Serpentine locomotion with robotic snakesIEEE Control Systems, 2002