0.18-V input charge pump with forward body biasing in startup circuit using 65nm CMOS
Authors:
- 1 September 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 08865930,p. 1-4
Abstract
In this paper, a 0.18-V input three-stage charge pump circuit applying forward body bias is proposed. In the developed charge pump, all the MOSFETs are forward body biased by using the inter-stage/output voltages. By applying the proposed charge pump as the startup in the boost converter, the lower kick-up input voltage of the boost converter can be achieved. To verify the circuit characteristics, four test circuits have been implemented by using 65nm CMOS process. The measured available output current of the proposed charge pump under 0.18-V input voltage can be improved more than 150%. In addition, the boost converter can successfully been boosted from 0.18-V input to the 0.74-V output under 6mA output current. The proposed circuit is suitable for extremely low voltage applications such as harvesting energy sources.Keywords
This publication has 5 references indexed in Scilit:
- A batteryless thermoelectric energy-harvesting interface circuit with 35mV startup voltage2010
- A novel strategy of a control IC for boost converter with ultra low voltage input and maximum power point tracking for single solar cell application2009 21st International Symposium on Power Semiconductor Devices & IC's, 2009
- A 1-V integrated current-mode boost converter in standard 3.3/5-V CMOS technologiesIEEE Journal of Solid-State Circuits, 2005
- An experimental 1.5-V 64-Mb DRAMIEEE Journal of Solid-State Circuits, 1991
- On-chip high-voltage generation in MNOS integrated circuits using an improved voltage multiplier techniqueIEEE Journal of Solid-State Circuits, 1976