Corrosion Model of a Rotor-Bar-Under-Fault Progress in Induction Motors
Authors:
- Jee-Hoon JungJee-Hoon Jung
- Bong-Hwan KwonBKBong-Hwan Kwon
- 30 November 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 53 (6) , 1829-1841
Abstract
A corrosion model of a rotor-bar-under-fault progress in induction motors is presented for simulations of induction machines with a rotor-bar fault. A rotor-bar model is derived from the electromagnetic theory. A leakage inductance of the corrosion model of a rotor bar is calculated from the relations of magnetic energy, inductance, current, and magnetic-field intensity by Ampere's law. The leakage inductance and resistance of a rotor bar varies when the rotor bar rusts. In addition, the skin effect is considered to establish the practical model of a rotor bar. Consequently, the variation of resistance and leakage inductance has an effect on the results of motor dynamic simulations and experiments, since a corrosive rotor bar is one model of a rotor bar in fault progress. The results of simulations and experiments are shown to be in good agreement with the spectral analysis of stator-current harmonics. From the proposed corrosion model, motor current signature analysis can detect the fault of a corrosive rotor bar as the progress of a rotor-bar fault. Computer simulations were achieved using the MATLAB Simulink with an electrical model of a 3.7-kW, three-phase, and squirrel-cage induction motor. Also, experimental results were obtained by real induction motors, which had the same specification as the electrical model used in the simulationKeywords
This publication has 8 references indexed in Scilit:
- Fault diagnosis of electrical machines-a review2003
- Current Signature Analysis to Detect Induction Motor FaultsIEEE Industry Applications Magazine, 2001
- Dynamic simulation of dynamic eccentricity in induction machines-winding function approachIEEE Transactions on Energy Conversion, 2000
- A novel approach for broken-rotor-bar detection in cage induction motorsIEEE Transactions on Industry Applications, 1999
- A method for dynamic simulation of air-gap eccentricity in induction machinesIEEE Transactions on Industry Applications, 1996
- Transient analysis of cage induction machines under stator, rotor bar and end ring faultsIEEE Transactions on Energy Conversion, 1995
- Multiple coupled circuit modeling of induction machinesIEEE Transactions on Industry Applications, 1995
- Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysisIEEE Transactions on Energy Conversion, 1991