Numerical investigations of vortex flows and vortex suppression schemes in a large pumping-station sump
- 25 May 2011
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 225 (6) , 1459-1480
Abstract
This work uses a commercial computational fluid dynamics code to predict three-dimensional (3D) vortex flows in a large centrifugal-pump station under construction in China and proposes relevant vortex-eliminating schemes. Because of the complex nature of the vortex flows in sumps, different turbulence models, namely, standard k–ε, re-normalization group k–ε and realizable k–ε models, are first used to investigate their feasibility in predicting flows in a small physical model of an open pump sump, and various vortex streamlines and strength in the sump are predicted, analysed, and compared with the experimental data. The comparisons show that the realizable k–ε model predicts the position and strength of free-surface, sidewall-attached, and floor-attached vortices more accurately than the other two models. Then, the realizable k–ε model is used here to investigate 3D vortex flows in a large pumping-station sump. All the various vortices, such as free-surface, wall-attached vortices, are successfully predicted. Thus, based on the information of location, shape, size, and strength of the calculated vortices, three types of vortex-eliminating devices are proposed and their corresponding vortex suppression effects are analysed. These results will be used as reference for the safe and stable operation of the Hui–Nan–Zhuang pumping station in the future.Keywords
This publication has 14 references indexed in Scilit:
- Numerical Simulation of 3-D Turbulent Flow in the Multi-Intakes Sump of the Pump StationJournal of Hydrodynamics, 2007
- Validation of a Large-Eddy Simulation Model to Simulate Flow in Pump Intakes of Realistic GeometryJournal of Hydraulic Engineering, 2006
- Numerical simulations of inviscid three-dimensional flows at single- and dual-pump intakesJournal of Hydraulic Research, 2002
- Experimental Study of 3D Pump-Intake Flows with and without Cross FlowJournal of Hydraulic Engineering, 2001
- Measurement of Vortices in Model Pump-Intake Bay by PIVJournal of Hydraulic Engineering, 2000
- Role of Turbulence Model in Prediction of Pump-Bay VorticesJournal of Hydraulic Engineering, 2000
- Experimental Validation of Numerical Model of Flow in Pump-Intake BaysJournal of Hydraulic Engineering, 1999
- Numerical Model for Simulation of Pump-Intake Flow and VorticesJournal of Hydraulic Engineering, 1998
- Effects of Approach Flow Conditions on Pump Sump DesignJournal of Hydraulic Engineering, 1996
- Near-wall turbulence models for complex flows including separationAIAA Journal, 1988