Effects of block shape and inclination on the stability of melange bimrocks
Open Access
- 18 September 2021
- journal article
- research article
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 80 (10) , 7457-7466
Abstract
A wide range of heterogeneous geological units composed of strong rock blocks enclosed in a bonded matrix of fine texture exists worldwide. Such geomaterials belong to geotechnically complex formations and are often referred to as bimrocks (block-in-matrix rocks) or bimsoils (block-in-matrix soils), as a function of their matrix characteristics and the interface strength between the matrix and blocks. Stability problems occurring in such complex geomaterials have been analysed almost exclusively by means of deterministic approaches and with the aim of investigating the effects of variable block contents on their mechanical behaviour. However, bimrocks and bimsoils can present very different internal block-in-matrix arrangements and properties according to their forming process and, consequently, significantly dissimilar mechanical behaviours. Therefore, the aim of this paper was to statistically investigate and compare the stability of theoretical slopes in the most widespread bimrock formations, i.e. sedimentary and tectonic melanges. These formations are characterised by substantial differences in their rock inclusion geometry. To this aim, a great number of 2D slope models were generated to enclose blocks with variable shapes, dimensions, arrangements, inclinations and contents. To obtain statistically based results, fifteen configurations were analysed for each block content and geometrical configuration considered. The results obtained indicate that block shapes and orientations significantly affect the stability of slopes in bimrocks only when the block contents are greater than 40%. Moreover, it is demonstrated that blocks inclined 0° to the horizontal provide the most tortuous and irregular failure surfaces and, consequently, the highest safety factors.Keywords
Funding Information
- Politecnico di Torino
This publication has 27 references indexed in Scilit:
- Effects of particle shape on shear strength of clay-gravel mixtureKSCE Journal of Civil Engineering, 2013
- Experimental Investigations into the Mechanical Behaviour of the Breccias Around the Proposed Gibraltar Strait TunnelRock Mechanics and Rock Engineering, 2013
- Block-in-Matrix Structure and Creeping Slope: Tunneling in Hard Soil and/or Weak RockGeotechnical and Geological Engineering, 2012
- The contribution of geostatistics to the characterisation of some bimrock propertiesEngineering Geology, 2012
- Mélanges and mélange-forming processes: a historical overview and new conceptsInternational Geology Review, 2010
- Evaluating the geomechanical properties of Misis fault breccia (Turkey)International Journal of Rock Mechanics and Mining Sciences, 2008
- Estimating the uniaxial compressive strength of a volcanic bimrockInternational Journal of Rock Mechanics and Mining Sciences, 2006
- Tunnelling in tectonic melanges?accommodating the impacts of geomechanical complexities and anisotropic rock mass fabricsBulletin of Engineering Geology and the Environment, 2004
- A fuzzy triangular chart to predict the uniaxial compressive strength of the Ankara agglomerates from their petrographic compositionEngineering Geology, 2002
- Classification of melanges1984