Effects of Microstructural Functional Layers on Flat‐Tubular Solid Oxide Fuel Cells
Authors:
- 8 November 2013
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 13 (6) , 1088-1100
Abstract
The functional layer of a flat‐tubular solid oxide fuel cell (SOFC) is examined using a three‐dimensional microscale electrode model. SOFC electrodes essentially include two types of layers: a structural layer and a functional layer. The structural layers, which are the anode support layer and the cathode current collector layer, are composed of large particles with a high porosity that facilitates gas diffusion. The functional layers consist of small particles with a low porosity that increases the triple phase boundary (TPB) reaction area and reduces the activation overpotential. In the model, the particle diameter and functional layer thickness are adjusted and analyzed. The effects of the two parameters on the performance of the functional layer are monitored in the contexts of several multilateral approaches. Most reactions occurred near the electrode–electrolyte interface; however, an electrode design that included additional TPB areas improved the electrode performance. The role of the functional layer in a flat‐tubular SOFC is examined as a function of the functional layer particle size and thickness. The performance of a cell could be enhanced by preparing a functional layer using particles of optimal size and thickness, and by operating the device under conditions optimized for these parameters.Keywords
This publication has 25 references indexed in Scilit:
- The current density and temperature distributions of anode-supported flat-tube solid oxide fuel cells affected by various channel designsInternational Journal of Hydrogen Energy, 2011
- Fabrication and operation of a 1 kW class anode-supported flat tubular SOFC stackInternational Journal of Hydrogen Energy, 2010
- Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cellJournal of Power Sources, 2008
- Parametric study of solid oxide fuel cell performanceEnergy Conversion and Management, 2007
- Prediction of Darcy–Forchheimer drag for micro-porous structures of complex geometry using the lattice Boltzmann methodJournal of Micromechanics and Microengineering, 2006
- Numerical study of a flat-tube high power density solid oxide fuel cellPart I. Heat/mass transfer and fluid flowJournal of Power Sources, 2005
- Simulation of a composite cathode in solid oxide fuel cellsElectrochimica Acta, 2004
- Fabrication and characteristics of anode-supported flat-tube solid oxide fuel cellJournal of Power Sources, 2003
- Micro-modelling of solid oxide fuel cell electrodesElectrochimica Acta, 1998
- Relation between percolation and particle coordination in binary powder mixturesActa Metallurgica et Materialia, 1991