Effect of the Addition of Waste Generated during the Plasma Cutting of Aluminum Products on the Friction and Emission Properties of a Commercial Friction Material Formulation
Open Access
- 8 December 2022
- journal article
- research article
- Published by MDPI AG in Atmosphere
- Vol. 13 (12) , 2056
Abstract
With recycling and reuse in mind, this study explores the possibility of the utilization of waste generated during the plasma cutting operations to produce aluminum products in a commercial friction material formulation for car braking applications. The as-received waste, analyzed in the form of a powder, was subjected to various characterization techniques to obtain its composition and phase constituents. The friction, wear, and emission analyses were organized in two ways: the first part focused on the selection of the most suitable waste content in the friction material formulation—10, 15, and 20 wt.%—tested in the form of pins, using a pin-on-disc tribometer. The second part evaluated the most suitable content in the formulation in the form of coupons on a subscale dynamometer to comprehend its friction and emission characteristics in a more complex scenario. Through the pin-on-disc analysis, it was seen that the 10 wt.% of waste in the formulation provided permissible friction and wear behavior, and similar emission magnitude and secondary plateau characteristics were seen, as compared to the reference composition. Similar results were recorded on the subscale dynamometer at mild braking conditions. At ‘severe’ testing conditions, a different trend was observed. Through this analysis, the possibility of the addition of this kind of waste in friction material composition has been evaluated deeply, paving a path for further analysis and possible implementation.Keywords
Funding Information
- European Union-FSE-REACT-EU, PON Research and Innovation (2014–2020 DM1062/2021)
This publication has 50 references indexed in Scilit:
- Characterization of non-exhaust coarse and fine particles from on-road driving and laboratory measurementsScience of The Total Environment, 2013
- Towards zero industrial waste: Utilisation of brick dust waste in sustainable constructionWaste Management, 2011
- Role of different metallic fillers in non-asbestos organic (NAO) friction composites for controlling sensitivity of coefficient of friction to load and speedTribology International, 2010
- The effect of Al2O3 on the friction performance of automotive brake friction materialsTribology International, 2007
- Microstructure characterization in cryomilled Al 5083Materials Science and Engineering: A, 2006
- Fatigue properties of friction stir welds in Al 5083 alloyScripta Materialia, 2005
- Review of automotive brake friction materialsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2004
- A simplified approach to the adhesive theory of frictionWear, 2001
- Structure of SpinelJournal of the American Ceramic Society, 1999
- The role of oxidation in the wear of alloysTribology International, 1998