A Novel Surge Damping Method for Hydraulic Transients with Operating Pump Using an Optimized Valve Control Strategy
Open Access
Abstract
Hydraulic transients may pose a critical threat to process operation due to devastating surge waves. This paper investigates hydraulic surge and damping control associated with pipe flow modeling and valve optimization. A one-dimensional transient model was developed using the modified instantaneous accelerations-based (IAB) model, considering energy dissipation, referred to as the compression–expansion effect, which was then solved by the Method of Characteristics (MOC). Analogous to solving valve operation by means of the traveling salesman problem (TSP), a novel surge damping strategy was proposed by applying an improved artificial fish swarm algorithm (AFSA). After validating the unsteady model and the optimization algorithm, wave surge damping effectiveness was evaluated on the basis of case studies in different pump running scenarios. The results showed that the proposed nonlinear optimized control method was able to reduce surge amplitude by 9.3% and 11.4% in pipe systems with and without running centrifugal pump, respectively, and was able to achieve a 34% time margin or a maximal 75.2% surge reduction in the case of using an positive displacement pump. The optimized nonlinear valve closure presents different shapes in fast closing and slow closing situations. The strategy proposed in the present study is beneficial for guiding valve real-time control, as well as providing a reference for valve design for the purpose of wave surge protection.Keywords
Funding Information
- National Natural Science Foundation of China (22108217, 21978227, 2021JQ052, XJ2020045)
- Natural Science Basic Research Program of Shaanxi Province (22108217, 21978227, 2021JQ052, XJ2020045)
- Hong Kong Scholars Program (22108217, 21978227, 2021JQ052, XJ2020045)
This publication has 39 references indexed in Scilit:
- Estimation of Decay Coefficients for Unsteady Friction for Instantaneous, Acceleration-Based ModelsJournal of Hydraulic Engineering, 2012
- Relevance of Unsteady Friction to Pipe Size and Length in Pipe Fluid TransientsJournal of Hydraulic Engineering, 2012
- Numerical simulation and optimization on valve-induced water hammer characteristics for parallel pump feedwater systemAnnals of Nuclear Energy, 2008
- Systematic Evaluation of One-Dimensional Unsteady Friction Models in Simple PipelinesJournal of Hydraulic Engineering, 2006
- Surge damping analysis in pipe systems: modelling and experimentsJournal of Hydraulic Research, 2004
- Applicability of Quasisteady and Axisymmetric Turbulence Models in Water HammerJournal of Hydraulic Engineering, 2002
- Evaluation of Unsteady Flow Resistances by Quasi-2D or 1D ModelsJournal of Hydraulic Engineering, 2000
- Effects of Two-Dimensionality on Pipe Transients ModelingJournal of Hydraulic Engineering, 1995
- Frequency-Dependent Friction in Transient Pipe FlowJournal of Basic Engineering, 1968
- Complete Pump Characteristics and the Effects of Specific Speeds on Hydraulic TransientsJournal of Basic Engineering, 1961