Design of a High-Order Dual-Band Superconducting Filter With Controllable Frequencies and Bandwidths
Authors:
- 11 November 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 24 (2) , 3-7
Abstract
This paper presents the design of an eight-pole dual-band bandpass high-temperature superconducting (HTS) filter with modified stub-loaded resonators (SLRs) and dual-feeding structures. The proposed modified SLRs are found to be advantageous because the even-mode and odd-mode couplings are separated from paths. The two bandwidths can be separately adjusted by two coupling paths. The proposed modified SLRs can conveniently be used to tune the two bandpass frequencies. Therefore, both the frequencies and bandwidths of each bandpass can be easily controlled. Moreover, the proposed modified SLRs can be also used to design high-frequency and high-order dual-band bandpass filters. A dual-feeding structure is adopted to match the external Q factor and internal couplings at two bandpass frequencies simultaneously. An eight-pole HTS dual-band bandpass filter operating at 2.55 and 3.53 GHz is designed and fabricated with a compact size of 18.14 mm × 9.36 mm to demonstrate the proposed design.Keywords
This publication has 9 references indexed in Scilit:
- Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators With Controllable Coupling and Feeding StructuresIEEE Microwave and Wireless Components Letters, 2013
- Dual-Band Superconducting Bandpass Filter Using Embedded Split Ring ResonatorIEEE Transactions on Applied Superconductivity, 2012
- Dual-Band Bandpass Filter With Controllable Bandwidths Using Two Coupling PathsIEEE Microwave and Wireless Components Letters, 2010
- Novel Multistub Loaded Resonator and Its Application to High-Order Dual-Band FiltersIEEE Transactions on Microwave Theory and Techniques, 2010
- High-selectivity dual-band bandpass filter using asymmetric stepped-impedance resonatorsElectronics Letters, 2009
- Design of Dual-Band Bandpass Filters Using Stub-Loaded Open-Loop ResonatorsIEEE Transactions on Microwave Theory and Techniques, 2008
- Dual-Band Bandpass Filters Using Stub-Loaded ResonatorsIEEE Microwave and Wireless Components Letters, 2007
- Design of Miniature Planar Dual-Band Filter Using Dual-Feeding Structures and Embedded ResonatorsIEEE Microwave and Wireless Components Letters, 2006
- Dual-band step-impedance bandpass filter for multimode wireless LANsElectronics Letters, 2004