A High-Performance Vortex Adjustment Design for an Air-Cooling Battery Thermal Management System in Electric Vehicles
Open Access
Abstract
To boost the performance of the air-cooling battery thermal management system, this study designed a novel vortex adjustment structure for the conventional air-cooling battery pack used in electric vehicles. T-shape vortex generating columns were proposed to be added between the battery cells in the battery pack. This structure could effectively change the aerodynamic patterns and thermodynamic properties of the battery pack, including turbulent eddy frequency, turbulent kinetic energy, and average Reynolds number, etc. The modified aerodynamic patterns and thermodynamic properties increased the heat transfer coefficient with little increase in energy consumption and almost no additional cost. Different designs were also evaluated and optimized under different working conditions. The results showed that the cooling performance of the Design 1 improved at both low and high air flow rates. At a small flow rate of 11.88 L/s, the Tmax and ΔT of Design 1 are 0.85 K and 0.49 K lower than the conventional design with an increase in pressure drop of 0.78 Pa. At a relative high flow rate of 47.52 L/s, the Tmax and ΔT of the Design 1 are also 0.46 K and 0.13 K lower than the conventional design with a slight increase in pressure drop of 17.88 Pa. These results demonstrated that the proposed vortex generating design can improve the cooling performance of the battery pack, which provides a guideline for the design and optimization of the high-performance air-cooling battery thermal management systems in electric vehicles.Keywords
Funding Information
- Australian Research Council (LP170100879)
- UTAS (LP170100879)
This publication has 48 references indexed in Scilit:
- Thermal behavior study of discharging/charging cylindrical lithium-ion battery module cooled by channeled liquid flowInternational Journal of Heat and Mass Transfer, 2018
- Mathematical modeling and experimental study of heat transfer in a low-duty air-cooled heat exchangerEnergy Conversion and Management, 2018
- Simulation of turbulent flow in MATIS-H rod bundle with split-type mixing vanesNuclear Engineering and Design, 2018
- Influence of spatial and temporal distribution of Turbulent Kinetic Energy on heat transfer coefficient in a light duty CI engine operating with Partially Premixed CombustionApplied Thermal Engineering, 2018
- A study of heat transfer enhancement in a new solar air heater having circular type turbulatorsJournal of the Energy Institute, 2016
- Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast chargingApplied Thermal Engineering, 2015
- Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteriesJournal of Power Sources, 2013
- Enhancement of air cooling in staggered array of electronic modules by integrating delta winglet vortex generatorsInternational Communications in Heat and Mass Transfer, 2006
- Battery thermal models for hybrid vehicle simulationsJournal of Power Sources, 2002
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994