Broadband fitting approach for the application of supercontinuum broadband laser absorption spectroscopy to combustion environments
- 10 December 2015
- journal article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 27 (1)
Abstract
In this work, a novel broadband fitting approach for quantitative in-flame measurements using supercontinuum broadband laser absorption spectroscopy (SCLAS) is presented. The application and verification of this approach in an atmospheric, laminar, non-premixed CH 4 /air flame (Wolfhard–Parker burner, WHP) is discussed. The developed fitting scheme allows for an automatic recognition and fitting of a B-spline curve reference intensity for SCLAS broadband measurements while automatically removing the influence of absorption peaks. This approach improves the fitting residual locally (in between absorption lines) and globally by 23% and 13% respectively, while improving the in-flame SNR by a factor of 2. Additionally, the approach inherently improves the time–wavelength-correlation based on recorded in-flame measurements itself in combination with a theoretical spectrum of the analyte. These improvements have allowed for the recording of complete spatially resolved methane concentration profiles in the WHP burner. Comparison of the measured absolute mole fraction profile for methane with previously measured reference data shows excellent agreement in position, shape and absolute values. These improvements are a prerequisite for the application of SCLAS in high-pressure combustion systems.Keywords
Funding Information
- Technische Universität Darmstadt
- Deutsche Forschungsgemeinschaft
This publication has 34 references indexed in Scilit:
- Fitting of calibration-free scanned-wavelength-modulation spectroscopy spectra for determination of gas properties and absorption lineshapesApplied Optics, 2014
- VCSEL-based, high-speed, in situ TDLAS for in-cylinder water vapor measurements in IC enginesOptics Express, 2013
- Doppler-limited H2O and HF absorption spectroscopy by sweeping the 1,321–1,354 nm range at 55 kHz repetition rate using a single-mode MEMS-tunable VCSELApplied Physics B, 2012
- Recent advances in coherent anti-Stokes Raman scattering spectroscopy: Fundamental developments and applications in reacting flowsProgress in Energy and Combustion Science, 2010
- TDLAS-based in situ measurement of absolute acetylene concentrations in laminar 2D diffusion flamesProceedings of the Combustion Institute, 2009
- Robust method for calculating temperature, pressure, and absorber mole fraction from broadband spectraApplied Optics, 2007
- Extension of wavelength-modulation spectroscopy to large modulation depth for diode laser absorption measurements in high-pressure gasesApplied Optics, 2006
- Combustion at the focus: laser diagnostics and controlProceedings of the Combustion Institute, 2005
- Sensitive in situ detection of CO and O2 in a rotary kiln-based hazardous waste incinerator using 760 nm and new 2.3 μm diode lasersProceedings of the Combustion Institute, 2005
- Simultaneous in situ measurement of CO, H _ 2 O, and gas temperatures in a full-sized coal-fired power plant by near-infrared diode lasersApplied Optics, 2003