Effect of several solid lubricants on the mechanical and tribological properties of phenolic resin‐based composites
Authors:
- 5 July 2014
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 36 (12) , 2203-2211
Abstract
The flake graphite, polytetrafluoroethylene, and molybdenum disulfide (MoS2) filled phenolic resin‐based composites were prepared by hot press molding. The thermal, mechanical, and tribological properties of composites were studied systematically. The morphologies of the worn surfaces and the change of chemical compositions during the sliding process of the composites were analyzed by scanning electron microscopy and X‐ray photoelectron spectroscopy, respectively. It was found that the heat‐resisting performance and the hardness of the composites are less affected by solid lubricants, while the solid lubricants did harm to the flexural strength of the composites. The friction and wear behaviors of composites highly depended on the volume fractions of solid lubricants and the sliding conditions. The wear resistance increases and the coefficient of friction decreases when the filler load increases. In addition, the appropriate content of solid lubricants is beneficial to reducing the sensitivities of the composites to load and sliding speed. POLYM. COMPOS., 36:2203–2211, 2015. © 2014 Society of Plastics EngineersKeywords
Funding Information
- The National Science Foundation for Distinguished Young Scholars of China (51025517)
- The National Natural Science Foundation of China (51303189)
This publication has 30 references indexed in Scilit:
- Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equationsMetals and Materials International, 2013
- Effects of Resin Type and Fiber Length on the Mechanical and Tribological Properties of Brake Friction MaterialsTribology Letters, 2011
- Thermally conductive rubber-based composite friction materials for railroad brakes – Thermal conduction characteristicsComposites Science and Technology, 2007
- Mechanical and tribological properties of phenolic resin-based friction composites filled with several inorganic fillersWear, 2007
- Effects of solid lubricants on friction and wear properties of Nomex fabric compositesMaterials Science and Engineering: A, 2006
- Tribological properties of solid lubricants (graphite, Sb2S3, MoS2) for automotive brake friction materialsWear, 2006
- Wear reduction mechanism of graphite and MoS2 in epoxy compositesWear, 2004
- Synergistic effects of aramid pulp and potassium titanate whiskers in the automotive friction materialWear, 2001
- Friction and wear of friction materials containing two different phenolic resins reinforced with aramid pulpTribology International, 2000
- Composites as friction materials: Recent developments in non‐asbestos fiber reinforced friction materials—a reviewPolymer Composites, 1997