FS-MPC Based Thermal Stress Balancing and Reliability Analysis for NPC Converters
Open Access
- 5 February 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 2, 124-137
Abstract
Active thermal control has been introduced to regulate the steady state and reduce the transient thermal-mechanical stress in power electronic modules. Specifically, it can equally distribute the temperature among the devices, thereby better distributing the stress among a set of devices and reducing the failure probability in the most thermally-stressed devices. This is of great importance for multilevel topologies and in particular for the Neutral Point Clamped (NPC) topologies, which have an inherent thermal unbalance among devices of the same phase. In hybrid structures, whereby Si and SiC devices are mixed to achieve a better trade-off between efficiency and cost, this problem is even worse due to technology differences. This paper investigates the advantages introduced by using Finite-Set Model Predictive Control (FS-MPC) algorithms designed for achieving a balanced device junction temperature in hybrid NPC and Active-NPC converters. Moreover, a novel setup composed by a hybrid ANPC based power modules is used to experimentally validate the presented FS-MPC algorithm. A lifetime estimation is performed for the two topologies to highlight the long-term benefits of FS-MPC algorithm in these hybrid topologies for UPS applications.Keywords
Funding Information
- Reliable Power Electronic-Based Power System
- European Research Council
- European Unions Seventh Framework (FP/2007-2013, 616344)
- Federal Ministry for Economic Affairs and Energy Program (0325797A)
- Mittelfrequenz-Mittelspannungs-Messstrom-Erzeugersfur Netzmessungen und Optimierungen
This publication has 44 references indexed in Scilit:
- Improved Modulation Scheme for Loss Balancing of Three-Level Active NPC ConvertersIEEE Transactions on Power Electronics, 2016
- Prediction of Bond Wire Fatigue of IGBTs in a PV Inverter under a Long-Term OperationIEEE Transactions on Power Electronics, 2015
- Modulation Methods for Three-Level Neutral-Point-Clamped Inverter Achieving Stress Redistribution Under Moderate Modulation IndexIEEE Transactions on Power Electronics, 2015
- New Modulation Scheme for Three-Level Active Neutral-Point-Clamped Converter With Loss and Stress ReductionIEEE Transactions on Industrial Electronics, 2015
- A New PWM Strategy for Grid-Connected Half-Bridge Active NPC Converters With Losses Distribution Balancing MechanismIEEE Transactions on Power Electronics, 2015
- Loss balancing SVPWM for active NPC converters2014
- Model Predictive Control of an Inverter With Output $LC$ Filter for UPS ApplicationsIEEE Transactions on Industrial Electronics, 2009
- The Active NPC Converter and Its Loss-Balancing ControlIEEE Transactions on Industrial Electronics, 2005
- Loss balancing in three-level voltage source inverters applying active NPC switches2002
- A new definition of the rainflow cycle counting methodInternational Journal of Fatigue, 1987