Wheel slide protection control using a command map and Smith predictor for the pneumatic brake system of a railway vehicle
- 30 June 2016
- journal article
- research article
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 54 (10) , 1491-1510
Abstract
In railway vehicles, excessive sliding or wheel locking can occur while braking because of a temporarily degraded adhesion between the wheel and the rail caused by the contaminated or wet surface of the rail. It can damage the wheel tread and affect the performance of the brake system and the safety of the railway vehicle. To safeguard the wheelset from these phenomena, almost all railway vehicles are equipped with wheel slide protection (WSP) systems. In this study, a new WSP algorithm is proposed. The features of the proposed algorithm are the use of the target sliding speed, the determination of a command for WSP valves using command maps, and compensation for the time delay in pneumatic brake systems using the Smith predictor. The proposed WSP algorithm was verified using experiments with a hardware-in-the-loop simulation system including the hardware of the pneumatic brake system.Keywords
Funding Information
- The Basic Science Research Program through the National Research Foundation of Korea (2013R1A1A2062374)
This publication has 19 references indexed in Scilit:
- A survey of wheel–rail contact models for rail vehiclesVehicle System Dynamics, 2016
- Development of an innovative wheel–rail contact model for the analysis of degraded adhesion in railway systemsTribology International, 2014
- Estimation of wheel–rail contact conditions and adhesion using the multiple model approachVehicle System Dynamics, 2013
- Evaluation of odometry algorithm performances using a railway vehicle dynamic modelVehicle System Dynamics, 2012
- Development of a New Wheel Slide Protection System Using a New Detection AlgorithmQuarterly Report of RTRI, 2011
- Pneumatic train brake simulation methodVehicle System Dynamics, 2009
- Effect of wheel-slip prevention based on sliding mode control theory for railway vehiclesVehicle System Dynamics, 2008
- Creep forces in simulations of traction vehicles running on adhesion limitWear, 2005
- A parametric library for the simulation of a Union Internationale des Chemins de Fer (UIC) pneumatic braking systemProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2004
- Wheel-rail rolling contact theoryWear, 1991