Geometry-Dependent Mechanical Performance of Additively Manufactured Metal–Polymer Hybrid Joints with Lattice-Based Transition Zones

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Metal–polymer hybrid joints are gaining importance as they combine high structural rigidity with a low weight. Additive manufacturing processes such as the laser powder bed fusion process (L-PBF) enable the production of complex metallic lattice structures that allow for form-fitting force transmission between the metal and polymer as mechanical interlock elements. In this work, metal–polymer hybrid compounds with additively manufactured transition zones are systematically investigated and mechanically evaluated. Three different lattice geometries (z4A, z8A, z8V) were fabricated from maraging steel (1.2709) using L-PBF and then hybridised with injection moulding using polypropylene (PP C7069-100NA). Mechanical characterisation was performed by tensile tests according to DIN EN ISO 527, in combination with statistical analyses and an analytical serial three-spring model to determine the homogenised elasticity modulus of the transition zone. The results show significant geometry-related differences in tensile strength, maximum force, and effective stiffness. The A-shaped transition zone geometry (z4A) achieves the highest mechanical performance and up to 82% of the tensile strength of the pure polymer, while the V-shaped transition zone geometry (z8V) has significantly lower load-bearing capacities. Variance analysis shows a dominant geometric influence with effect strength of η2 ≈ 0.99. The analytically predicted stiffness values match the experimental results within 5–10%. This work demonstrates a reproducible, simulation-sparse approach to the analysis and design of metal–polymer hybrid connections.
Funding Information
  • Österreichische Forschungsförderungsgesellschaft (51188104)

This publication has 37 references indexed in Scilit: