Thermoplastic Composites Based on Renewable Natural Resources: Unplasticized PVC/Olive Husk
Authors:
- 21 September 2010
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 59 (11) , 843-853
Abstract
The current study explores the potential of eco-friendly biomaterials, namely olive husk (OH) as a reinforcing filler for PVC composite. Thus, composite-based unplasticized poly(vinyl chloride) (u PVC) and olive husk were mixed by a Brabender two-roll mill at 180°C and 25 rpm. The olive husk concentration was progressively varied from 0–20 phr. The fabricated samples were inspected with respect to their tensile properties, impact strength, thermal stability, and density and water uptake. It has been found that stress at peak increased with filler loading up to certain loading. This scenario was related to hydrogen bond formation due to polar-polar interactions. Evidence of the hydrogen bond formation between the polymer matrix and the olive husk was examined with the aid of attenuated reflectance infrared spectra (ATR-IR). Such interactions were cited to justify the improved performance of the composites. Fracture mode and filler dispersion of the composites were compared to the unfilled counterpart by scanning electron microscopy (SEM). The influence of olive husk on the thermal stability of the PVC composites was studied by differential scanning calorimeter (DSC). It has been found that the enthalpy of fusion was improved with OH loading. The observed trend was correlated with the phenolic hydroxyl group of the lignin component used as an antioxidant.Keywords
This publication has 10 references indexed in Scilit:
- Application of Renewable Agro-Waste-Based Olive Pomace on the Mechanical and Thermal Performance of Toughened PVCPolymer-Plastics Technology and Engineering, 2009
- The Potential of O‐MMT as a Reinforcing Filler for Uncured and Dynamically Cured PVC/XNBR CompositesJournal of Macromolecular Science, Part A, 2008
- Thermal, mechanical and morphological properties of polypropylene/clay/wood flour nanocompositesExpress Polymer Letters, 2008
- Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue compositesJournal of Applied Polymer Science, 2007
- Physical and Mechanical Properties of Natural Fibers Filled Polypropylene Composites and Its RecycleJournal of Biological Sciences, 2007
- Effect of wood filler treatment and EBAGMA compatibilizer on morphology and mechanical properties of low density polyethylene/olive husk flour compositesExpress Polymer Letters, 2007
- Effect of chemical treatment of wood flour on the properties of styrene butadiene rubber/polystyrene compositesJournal of Applied Polymer Science, 2006
- Effect of Oil Palm Empty Fruit Bunch and Acrylic Impact Modifier on Mechanical Properties and Processability of Unplasticized Poly(Vinyl Chloride) CompositesPolymer-Plastics Technology and Engineering, 2005
- THE EFFECT OF OIL EXTRACTION OF THE OIL PALM EMPTY FRUIT BUNCH ON THE MECHANICAL PROPERTIES OF POLYPROPYLENE–OIL PALM EMPTY FRUIT BUNCH–GLASS FIBRE HYBRID COMPOSITESPolymer-Plastics Technology and Engineering, 2001
- Interfaces in polyolefin/cellulosic fiber composites: Chemical coupling, morphology, correlation with adhesion and aging in moisturePolymer Composites, 1998