Effective Surface Structure Changes and Characteristics of Activated Carbon with the Simple Introduction of Oxygen Functional Groups by Using Radiation Energy
Open Access
Abstract
In recent years, research has aimed to enhance the environmental friendliness of activated carbon by modifying its surface properties to effectively capture specific harmful gases. This study’s primary goal is to swiftly introduce oxygen functional groups to activated carbon surfaces using microwave and plasma techniques and evaluate their characteristics. In the microwave method, we varied nitric acid concentrations and treatment durations for surface modification. Additionally, plasma treatment was used to introduce oxygen functional groups for comparative purposes. Surface characteristics were assessed through SEM, BET, XPS, and FT-IR analyses. The results indicate that in the microwave method, the quantity of oxygen functional groups increased with longer reaction times. Specifically, the sample treated for 20 min with 8 moles of nitric acid displayed an oxygen content of 14.11 at%, and higher nitric acid concentrations led to a reduced specific surface area. In the case of plasma treatment, higher oxygen flow rates resulted in an O1s content of 17.1 at%, and an increase in oxygen flow rate introduced more oxygen functional groups but decreased the specific surface area.Keywords
Funding Information
- Korea Evaluation Institute of Industrial Technology (20012870)
This publication has 30 references indexed in Scilit:
- The effects of a microwave heating method on the production of activated carbon from agricultural waste: A reviewJournal of Analytical and Applied Pyrolysis, 2013
- Effects of fluorination on carbon molecular sieves for CH4/CO2 gas separation behaviorInternational Journal of Greenhouse Gas Control, 2012
- Surface modification of coconut shell based activated carbon for the improvement of hydrophobic VOC removalJournal of Hazardous Materials, 2011
- A review on surface modification of activated carbon for carbon dioxide adsorptionJournal of Analytical and Applied Pyrolysis, 2010
- Effect of surface acidic oxides of activated carbon on adsorption of ammoniaJournal of Hazardous Materials, 2008
- Ammonia adsorption in a fixed bed of activated carbonBioresource Technology, 2007
- Review of modifications of activated carbon for enhancing contaminant uptakes from aqueous solutionsSeparation and Purification Technology, 2007
- Adsorbability enhancement of activated carbon by dielectric barrier discharge plasma treatmentSurface and Coatings Technology, 2005
- Indoor air purification by photocatalyst TiO2 immobilized on an activated carbon filter installed in an air cleanerChemical Engineering Science, 2005
- Effect of Ozone Treatment on Surface Properties of Activated CarbonLangmuir, 2002