Evolution of Pore Volume During Stripping of Lithium Metal in Solid‐State Batteries Observed with Operando Dilatometry
Open Access
Abstract
Lithium metal solid‐state batteries are prone to pore formation at the interface between the metal anode and the solid electrolyte during discharge, when the applied current density exceeds the lithium vacancy diffusion rate in the metal. This leads to contact loss and eventually battery failure. To better understand the mechanisms of pore formation at the anode interface, operando information on the total pore volume is essential. In this study, a dedicated dilatometric measurement setup for operando tracking of pore volume is presented and validated. The working principle of this method is demonstrated in a case study on symmetric lithium‐garnet cells. The combination of the dilatometric data with galvanostatic electrochemical impedance spectroscopy (GEIS) allows for a systematic study of pore formation in any metal solid‐state battery. To quantify this process, the vacancy injection ratio is introduced, as a measure of the fraction of lithium atom sites that remain empty during stripping. These experimental results reveal that, under the conditions applied, pore formation begins immediately upon stripping, even before becoming detectable by GEIS. Furthermore, it is shown that pores initially grow laterally near the surface before deepening at later stages. Based on these findings, a pore formation and growth mechanism is proposed.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt
This publication has 59 references indexed in Scilit:
- Evaluating Pressure‐dependent Discharge Behavior of Foil Versus In situ Plated Lithium Metal Anodes in Solid‐State BatteriesAdvanced Energy Materials, 2024
- High‐Precision Dilatometry for the Study of Precipitation Processes and Microalloying Effects in Lightweight Alloys ‐ A Specific ReviewAdvanced Engineering Materials, 2024
- Guidelines for Impedance Analysis of Parent Metal Anodes in Solid‐State Batteries and the Role of Current Constriction at Interface Voids, Heterogeneities, and SEIAdvanced Materials Interfaces, 2023
- Developments in Dilatometry for Characterisation of Electrochemical DevicesBatteries & Supercaps, 2021
- Working Principle of an Ionic Liquid Interlayer During Pressureless Lithium Stripping on Li6.25Al0.25La3Zr2O12 (LLZO) Garnet‐Type Solid ElectrolyteBatteries & Supercaps, 2021
- Interfacial Atomistic Mechanisms of Lithium Metal Stripping and Plating in Solid‐State BatteriesAdvanced Materials, 2021
- Diffusion Limitation of Lithium Metal and Li–Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and PressureAdvanced Energy Materials, 2019
- 30 Years of Lithium‐Ion BatteriesAdvanced Materials, 2018
- Investigation of Charge Transport Across the Ag | AgI‐interface: (I) Occurrence of Periodic Phenomena During Anodic Dissolution of SilverBerichte der Bunsengesellschaft für physikalische Chemie, 1995
- Electroceramics: Characterization by Impedance SpectroscopyAdvanced Materials, 1990