ENHANCEMENT OF COIR FIBER NORMAL INCIDENCE SOUND ABSORPTION COEFFICIENT
- 1 March 2012
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in Journal of Computational Acoustics
- Vol. 20 (01) , 1250003
Abstract
Coir fiber from coconut husk is an important agricultural waste in Malaysia. The porous structure of fiber makes it an eligible material for acoustical absorption. In previous studies at Universiti Kebangsaan Malaysia, single layer coir fiber showed low acoustical absorption in medium and low frequencies; e.g. absorption coefficient of a 20 mm industrial prepared coir fiber sample was below 0.3 for frequencies less than 1.5 kHz. Current research was initiated to improve the shortcoming by mixing industrial prepared coir fiber with air gap layers. Analyzes were based on two approaches, namely; Delany–Bazley with acoustic transmission analysis (ATA) and Allard elastic model with transfer matrix analysis. Experimental measurements were conducted in impedance tube to validate the analytical results. Outcomes described that Delany–Bazley-ATA technique was an approximate solution showing overall absorption path without giving any accurate information about the peaks and resonances. Allard method took the elasticity of material into account and transfer matrices were able to characterize the whole structure as a combination of single layers. Results were close to experimental values and predicted the path and resonances very well. Further analyzes were conducted by Allard method and derived that having a fiber layer backed by an air gap was better than leaving the same gap in between that layer. The explanation was that, in the first arrangement, the sound field impacted a solid layer with higher thickness and followed a longer transmission path which caused a higher acoustical absorption. Furthermore, it was noticed that a reasonable thickness of backing air gap improved the overall sound absorption. Increase in the gap thickness produced more peaks and moved them to lower frequencies which caused better absorption in low frequencies. The cause of this phenomenon was increase in impedance of the panel due to rise in the air-gap thickness. This moved the acoustical resonances to lower frequencies and improved the sound absorption in this frequency span. Finally, it was concluded that other acoustic absorption techniques such as adding perforated plate may be combined with coir fiber-air gap structure to improve the low frequency acoustic absorption coefficient without any need to highly increase the air gap thickness.Keywords
This publication has 18 references indexed in Scilit:
- Acoustic Properties of Multi-Layer Coir Fibres Sound Absorption PanelJournal of Applied Sciences, 2008
- ON THE ACOUSTIC ABSORPTION OF MULTI-LAYER ABSORBERS WITH DIFFERENT INNER STRUCTURESJournal of Sound and Vibration, 2003
- ACOUSTIC TRANSMISSION ANALYSIS OF MULTI-LAYER ABSORBERSJournal of Sound and Vibration, 2001
- ON THE ACOUSTIC ABSORPTION OF POROUS MATERIALS WITH DIFFERENT SURFACE SHAPES AND PERFORATED PLATESJournal of Sound and Vibration, 2000
- Dynamic compressibility of air in porous structures at audible frequenciesThe Journal of the Acoustical Society of America, 1997
- The sound field within a rigid porous layerApplied Acoustics, 1995
- A general method of modelling sound propagation in layered mediaJournal of Sound and Vibration, 1995
- The effect of a porous facing on the impedance and the absorption coefficient of a layer of porour materialJournal of Sound and Vibration, 1992
- Inhomogeneous plane waves in layered materials including fluid, solid and porous layersWave Motion, 1991
- Theory of dynamic permeability and tortuosity in fluid-saturated porous mediaJournal of Fluid Mechanics, 1987