Oxidation Behavior of Maraging 300 Alloy Exposed to Nitrogen/Water Vapor Atmosphere at 500 °C
Authors:
- Mauro Andres Cerra FlorezMFMauro Andres Cerra Florez
- Gemma Fargas RibasGRGemma Fargas Ribas
- Jorge Luiz CardosoJCJorge Luiz Cardoso
- Antonio Manuel Mateo GarcíaAntonio Manuel Mateo García
- Joan Josep Roa RoviraJoan Josep Roa Rovira
- Moises Bastos-NetoMBMoises Bastos-Neto
- Hamilton Ferreira Gomes de AbreuHAHamilton Ferreira Gomes de Abreu
- Marcelo José Gomes da SilvaMSMarcelo José Gomes da Silva
Open Access
Abstract
Aging heat treatments in maraging steels are fundamental to achieve the excellent mechanical properties required in several industries, i.e., nuclear, automotive, etc. In this research, samples of maraging 300 alloy were aged using a novel procedure that combines different steps with two atmospheres (nitrogen and water vapor) for several hours. The oxidized surface layer was chemical, microstructural and micromechanically characterized. Due to the thermodynamic and kinetic conditions, these gases reacted and change the surface chemistry of this steel producing a thin iron-based oxide layer of a homogeneous thickness of around 500 nm. Within the aforementioned information, porosity and other microstructural defects showed a non-homogeneous oxide, mainly constituted by magnetite, nickel ferrite, cobalt ferrite, and a small amount of hematite in the more external parts of the oxide layer. In this sense, from a chemical point of view, the heat treatment under specific atmosphere allows to induce a thin magnetic layer in a mixture of iron, nickel, and cobalt spinel ferrites. On the other hand, the oxide layer presents an adhesive force 99 mN value that shows the capability for being used for tribological applications under sliding contact tests.Keywords
Funding Information
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (PRINT-88887.371681/2019-00.)
This publication has 45 references indexed in Scilit:
- Microstructural characterization of grade 300 and grade 350 maraging steels and electrochemical study in hydrofluoric solutionJournal of Fluorine Chemistry, 2021
- Iron oxide surfacesSurface Science Reports, 2016
- Nanoferrites of nickel doped with cobalt: Influence of Co2+ on the structural and magnetic propertiesJournal of Magnetism and Magnetic Materials, 2015
- Heat Treating of Maraging Steels2014
- Structure and corrosion resistance of oxides grown on maraging steel in steam at elevated temperaturesApplied Surface Science, 1997
- Precipitation Hardening in 350 Grade Maraging SteelMetallurgical Transactions A, 1993
- The kinetics of oxide film growth on Maraging steel as described by space‐charge effectsSurface and Interface Analysis, 1990
- The oxidation mechanism of Fe-Ni-Co alloysOxidation of Metals, 1981
- The strength and fracture toughness of 18 Ni (350) maraging steelMetallurgical Transactions, 1971
- Martensite: fundamentals and technologyedited by E. R. PettyJournal of Applied Crystallography, 1971