On the Causes of Circulating Currents in PWM Drives With Open-End Winding AC Machines
Authors:
- 12 July 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 60 (9) , 3670-3678
Abstract
Electric drives with open-end winding ac machines offer certain advantages over drives with star- or delta-connected machines. Such drives have been recently considered for some applications such as electric vehicles. Circulating currents have been experimentally observed in such open-end winding ac drives. These currents have the effect of increasing conduction losses in the stator winding resistance of the ac machine. Two major causes for these currents have been identified as device voltage drops in power semiconductor devices and dead time used for shoot-through current protection. These effects are analyzed, and a mathematical description for predicting their severity is provided. Experimental results are presented that support the theory. The theory developed should be useful for devising solutions for this problem such as the design of common-mode filters. Two methods of suppressing the circulating currents are also outlined, and their experimental results are presented.Keywords
This publication has 34 references indexed in Scilit:
- Dead Time Compensation Method for Voltage-Fed PWM InverterIEEE Transactions on Energy Conversion, 2009
- A Dual Five-Level Inverter-Fed Induction Motor Drive With Common-Mode Voltage Elimination and DC-Link Capacitor Voltage Balancing Using Only the Switching-State Redundancy—Part IIEEE Transactions on Industrial Electronics, 2007
- Improved Dead-Time Compensation for Sinusoidal PWM Inverters Operating at High Switching FrequenciesIEEE Transactions on Industrial Electronics, 2007
- A Dual Two-Level Inverter Scheme With Common Mode Voltage Elimination for an Induction Motor DriveIEEE Transactions on Power Electronics, 2004
- Dual-Inverter Control Strategy for High-Speed Operation of EV Induction MotorsIEEE Transactions on Industrial Electronics, 2004
- The influence of topology selection on the design of EV/HEV propulsion systemsIEEE Power Electronics Letters, 2003
- Safe control of four-quadrant switches2003
- Matrix converters: a technology reviewIEEE Transactions on Industrial Electronics, 2002
- Analysis of Electric Machinery and Drive Systems2002
- Pulse-based dead-time compensator for PWM voltage invertersIEEE Transactions on Industrial Electronics, 1997