Electron Beam Irradiation of Noncrosslinked LDPE–EVA Foam
Authors:
- 1 November 2002
- journal article
- research article
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 38 (6) , 471-496
Abstract
The conventional cross-linking method using an electron beam for polyolefin foams is highly efficient, but the drawbacks are: costly equipment, nonuniform crosslinking, uneven dispersion of chemical foaming agents and additives, and relatively low gel content, which affect physical properties of the foam. In this paper, low density polyethylene (LDPE) and ethylene vinyl acetate (EVA) were blended in an 80/20 ratio, and this noncrosslinked foam was exposed to various doses of electron beam irradiation in air. The foam was made using isobutane as the blowing agent. It has been found that foam with uniform cell structure was not achieved in the case of precrosslinked foam with more than 40% gel fraction. On the other hand, noncrosslinked foams are easily crosslinked to a gel content of about 57% with an electron beam irradiation under optimum conditions. The gel content of the postcrosslinked foams increases with increase in the irradiation dose, beam intensity, irradiation temperature and with the crosslinking coagent content. As derived from experimental studies, beam intensity seems to be the most essential parameter in regard to gel content homogeneity. Noticeable changes in mechanical properties, e.g. tensile strength, tear strength, compressive strength and hardness, were also observed. This paper also presents an experimental study on the manufacture of low-density open-cell foam.Keywords
This publication has 13 references indexed in Scilit:
- Alterations of molecular characteristics of polyethylene under the influence of γ-radiationPolymer, 2000
- Molecular structure evolution in peroxide‐initiated crosslinking of an ethylene vinyl acetate copolymer and a metallocene polyolefin elastomerPolymer Engineering & Science, 1999
- Effects of gamma‐irradiation on mechanical characteristics of recycled polyethylene blendsPolymer Engineering & Science, 1999
- Low density microcellular foam processing in extrusion using CO2Polymer Engineering & Science, 1998
- A Study of the Reaction Kinetics Involved in a Crosslinked LDPE FoamJournal of Cellular Plastics, 1997
- Gamma radiation induced crosslinking of polyethylene/ethylene—vinylacetate blendsRadiation Physics and Chemistry, 1995
- Crosslinking reactions of ethylene vinyl silane copolymers at processing temperaturesJournal of Applied Polymer Science, 1991
- Energy absorption characteristics of polymeric foams used as cushioning materialsPolymer Engineering & Science, 1990
- Radiation crosslinking of poly(vinyl chloride) with trimethylolpropanetrimethacrylate. II. Dependence on radiation dose and blend compositionJournal of Applied Polymer Science, 1983
- Radiation crosslinking of poly(vinyl chloride)Journal of Applied Polymer Science, 1972