The Effect of Web Permeability and Side Leakage on the Air Film Height Between a Roller and Web
Authors:
- 1 July 1998
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 120 (3) , 559-565
Abstract
Air entrained between a web and roller can cause a loss in traction that can affect web quality. The entrained air causes an air layer to form which separates the web from the roller. Insufficient traction exists at this point and an idler roller will be unable to be driven by the web. Other applications, however, such as newsprint moving around a turnbar, require complete clearance. An equation for predicting the air film height between a permeable web and roller was developed using foil bearing theory. The separation distance (h) between the roller and web is a function of the roller radius (R), web tension (T), air viscosity (η), summation of the web and roller velocities (U), and the web permeability (α). The air film height was found to decrease linearly around the circumference (θ) of the roller in the constant pressure region. Therefore, the air film height can be expressed simply as, h=0.643R[(6ηU)/T]2/3−2[(αT)/U]θ The slope of the air film height is a function of the web/roller velocity, web tension, and the permeability of the paper. A correction factor for side leakage was also incorporated into the result.Keywords
This publication has 6 references indexed in Scilit:
- The Importance of Traction in Web HandlingJournal of Tribology, 1995
- Introduction to numerical analysis (2nd edition in English), by J. Stoer and R. Bulirsch. Pp 660. DM 89. 1993. ISBN 3-540-97878-X (Springer)The Mathematical Gazette, 1995
- Fluid Effects Associated with Web HandlingIndustrial & Engineering Chemistry Process Design and Development, 1971
- An Experimental Study of Elastohydrodynamic Lubrication of Foil Bearings: Part 1—Displacement in the Central ZoneJournal of Lubrication Technology, 1968
- Self-Acting Foil Bearings of Infinite WidthJournal of Lubrication Technology, 1967
- An Investigation of Self-Acting Foil BearingsJournal of Basic Engineering, 1965